Specifications

• Iconic Mid-Century Modern Styling
• Acoustic Suspension Design – The most accurate and linear
enclosure design available today
• Three-Position Acoustic Balance Control to tailor the loudspeaker’s
output for the most difcult acoustic environments
• Dedicated midrange driver to reproduce the critical
mid-frequency band
• Non-Resonant Die-Cast Aluminum Midrange & Woofer Frames
• Machined Aluminum 1” tweeter faceplate
• KLH cabinetry featuring a structurally reinforced
¾” MDF Enclosure
• Thirteen Component network using high quality iron-core
inductors & Mylar capacitors
• Each speaker includes its own 5˚ slant riser base made of powder
coated 14-gauge steel
• Low-Prole Magnet Attached Grille
• 10-Year Warranty
• Model Five Loudspeaker
• Matte Black Slant Riser Base
• Owner’s Manual
The legendary KLH Model Five was rst introduced in 1968 and served as the heart
and soul of KLH’s success throughout the late 1960’s and 1970’s. At its core was the
acoustic suspension design that dominated the loudspeaker industry for decades
and made the Model Five one of the best-selling loudspeakers of its era. In 2021,
KLH re-introduced the Model Five; building on the original acoustic suspension
design and using the most advanced loudspeaker technology available today.
Specifications
MODEL FIVE
3-way, 10” Acoustic Suspension Loudspeaker
What’s in the Carton
Features
Finish
Genuine West
African Mahogany
Veneer and Old World
Linen Grille Cloth
Stonewash Linen
Grille available
through special
order
Optional Accessories
Frequency Response: 42Hz – 20,000Hz +/- 3dB
Low Frequency Extension: -10dB @ 32Hz
In-Room Sensitivity: 90.5dB @2.83V / 1M
Free-eld Sensitivity: 87.5dB @ 2.83V / 1M
Power Handling: 200 Watts / 800 Watts Peak
Recommended Amplication: 20 Watts to 200 Watts
In-Room Maximum SPL: 112.3dB
Impedance: 6 Ohms (3.5 ohm minimum @140 Hz)
Horizontal Dispersion: 140° Degrees
Features: Three-Position Acoustic Balance Control
Crossover Frequency: MF: 380Hz (2nd Order Electro-Acoustic)
HF: 2,850Hz (2nd Order Electro-Acoustic)
High Frequency Driver: 1" Aluminum Dome with Soft
Rubber Suspension
Mid Frequency Driver: 4" Pulp-Paper Cone with Reverse
Roll Rubber Suspension
Low Frequency Driver: 10" Pulp-Paper Cone with Reverse
Roll Rubber Suspension, 2" Diameter
Flat-Wire Voice Coil
Enclosure Material: Structurally Reinforced ¾" Medium
Density Fiberboard
Inputs: Five-Way Gold-Plated Binding Posts
Height: 34.25" (87.0cm) w/ Included Riser Base
26.0" (66cm) w/o Riser Base
Width: 13.75" (35.0cm)
Depth: 13.0" (33.0cm) w/ Included Riser Base
11.5" (29.2cm) w/o Riser Base
Weight: 44Ibs. (20.0kg) w/o Riser Base
52Ibs. (23.6kg) w/ Included Riser Base
Included Accessories: 5° Slant Riser Base
Specications subject to change without notice.
(all specications for a single speaker)