IMPORTANT! Remove the clear plastic tabs located on the earbud charging points.
TRUE WIRELESS EARBUDS M MANUAL L
FCC STATEMENT THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES: Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference that is received, including any interference that may cause undesired operation. RF Exposure Warning: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
SAFETY INSTRUCTIONS FOR LITHIUM RECHARGEABLE BATTERIES WARNING While the FUSION True Wireless Earbuds are built from durable materials, abuse or misuse may cause the lithium batteries to leak, and in extreme cases, damaged headphones may present a risk of explosion, combustion, heat generation, smoke or harmful gas. PACKAGE CONTENT Fusion True Wireless Earbuds. USB-C to USB-A Adapter. Carrying/Charging case. USB-C to USB-C Charging Cord.
The built-in LED display indicates the percentage of charge left in the case when detached from the charger. A fully charged case offers up to 3 additional charges. Earbud LEDs indicate that earbuds are charging and turn off when fully charged (Figure 1). Earbud Charge Indicators (Turns Off When Fully Charged) Case Charge Indicators A full earbud charge takes approximately 90 minutes. Fully charged earbuds will have up to 7 hours of playing time.
CHARGING The FUSION case should carry an initial charge, however, if case charge is low, then charge case and earbuds using the included USB-C to USB-C cable (and USB-C TO USB-A adapter if needed) for 5-10 minutes. Do not take the earbuds out during this time. The USB cable can be attached to either a wall charging unit or computer (Figure 2). The Fusion charging case is capable of wireless charging. Wirelessly charge your device using a Qi certified charge pad or supported device (Figure 3).
Start by removing the earbuds from their case. This will automatically turn them ON and resets the earbuds to their default condition. Insert each earbud into the ear canal (each earbud is labeled L for Left, R for Right), and adjust until upper portion fits comfortably into concha (Figure 4). If factory applied medium silicone tips do not fit, change to the other provided ear tips until properly sealed and a comfortable fit is achieved (Figure 5).
USING YOUR EARBUDS GENERAL OPERATION • Some mobile devices will display earbud battery level on status bar near Bluetooth indicator. MUSIC AND PHONE CONTROL • Quick touch each earbud for three seconds to power ON. • Long touch either earbud for 8 seconds to turn OFF. • Triple touch either earbud to pause. • Triple touch either earbud to resume play. • Quick touch left earbud to turn volume down. • Quick touch right earbud to turn volume up. • Double touch either earbud to track forward.
ACCEPTING, REJECTING, OR ENDING A CALL If your earbuds are connected to a smartphone and you receive a call, you will hear a ring tone in the earbuds. If you are playing music when you receive a call, the music will pause until you end the call. CARE AND CLEANING To care for your KLH FUSION True Wireless Earbuds, simply clean with a soft, dry cloth, avoid using solvents or caustic materials.
OSHA GUIDELINES FOR NOISE EXPOSURE LEVELS Sound Pressure Level 5HFRPPHQGHG 0D[LPXP Exposure Per Day 90dB 8 Hours 92dB 6 Hours G% 4 Hours 97dB 3 Hours 100dB 2 Hours 102dB +RXUV G% 1 Hours 110dB 30 Minutes G% 0LQXWHV RU OHVV 120dB Avoid as damage may occur
WARRANTY Our 1 year warranty (2 years in EU) begins from purchase date of the item (Receipt Date). Warranty registration must be completed at KLHAUDIO.com/ warranty. Registration of the product must be completed within 60 days of purchase for warranty validation. Original receipt of purchase must be retained for proof of purchase. For warranty or service issues, please DO NOT contact the place of purchase but rather contact KLH Customer Service directly.
TROUBLESHOOTING Once the earbuds are successfully paired to your device, follow these steps in the event one, or both, earbuds lose connection. The first step is to place both earbuds in the charging case. This will reset both earbuds to their default condition. After a few seconds, remove both earbuds and allow them to automatically pair (or connect) to your device.
klhaudio.
KLH FUSION Quick Start Guide The case should carry an initial charge. If case charge is low, then charge case and earbuds using the included USB-C to USB-C cable (and USB-C to USB-A adapter if needed) for 5-10 minutes. The Fusion charging case is capable of wireless charging. Wirelessly charge your device using a Qi certified charge pad or supported device • Gently remove the earbuds from the case. This will automatically turn them ON and place them in pairing mode.
KLH FUSION Music and Phone Touch Control • Quick touch each earbud to power ON • Long touch either earbud for 7 seconds to power OFF • Triple touch either earbud to pause • Triple touch either earbud to resume play • Double touch either earbud to track forward • Quick touch either earbud four times to track back • Double touch either earbud to accept call • Long press either earbud for 2 seconds to reject call • Long press either earbud for 2 seconds to access voice assistant
''Play music'' ''Reject call'' ''Pause music'' ''Volume Up'' ''Previous song'' ''Volume Down'' ''Next song'' ''Hey SIRI'' ''Accept call''
TRUE WIRELSS EARBUDS FEATURES: • AAC/aptX High-Definition Sound • 4 Knowles® MEMS/Smart Microphones • Answer Calls, Play Music, Adjust VolumeAll Hands Free • 28 Hours Play Time From One Case Charge • 90 Minute Earbud Full-Charge Time • Over 7 Hours Earbud Battery Life • 6mm Dynamic Drivers • Environmental Noise Cancellation • Qualcomm Wireless Bluetooth V5.