Owners Manual

ManualsBrandsKLH Audio ManualsAudioFaraday Series In-Wall Speaker

For existing walls, make sure the speaker cutout

is placed between two joists with plenty of

clearance. Use a stud finder to locate joists, and

mark locations. Be sure to avoid electrical wires

and plumbing when cutting hole for installation.

If you encounter electrical wiring or plumbing,

you may have to consider another location (See

illustration below).

Connect the wires using the provided fasteners by

pushing down on the spring clip and inserting the

trimmed, exposed wire into the clip hole. Remove

pressure on the clip, and the wire should be locked

into place. Remember, red clip is + and black clip

is - (See illustration at below).

Make sure that grille is removed from the speaker.

Place the speaker into the hole and press tightly

against drywall with one hand, and tighten each of

the screws until the speaker is firmly in place.

(See illustrations 1-3).

SPEAKER PLACEMENT AND LOCATION

Optimum speaker

placement depends on

personal listening prefer-

ence and, when used in

home theater applications,

follow standard listening

recommendations for

left, center, right andsur-

round usage.

INSTALLATION

If you are installing in new construction, it is

recommended that you use an install kit. These

kits are put in place before the installation of

drywall. The Install kit adds security, and can be

used to more accurately cut the hole for final

installation (See illustrations 1-7).

Note: Recommended install kit is WK-6600.

AMPLIFIER

SPEAKER

ws.

WELCOME!

Thank you for purchasing our KLH Faraday In-wall

speakers. We have constructed these speakers with

the finest quality materials to provide many years of

outstanding performance.

FOR YOUR SAFETY

Important Safety Instructions!

1. READ these instructions.

2. KEEP these instructions.

3. HEED all warnings.

4. FOLLOW all instructions.

5. DO NOT use this apparatus near water.

6. CLEAN ONLY with dry cloth.

7. DO NOT block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radia-

tors, heat registers, stoves, or other heat producing

appliances

9. ONLY USE attachments/accessories specified by

the manufacturer.

10. DO NOT expose to excess moisture or liquids,

and do not place containers with liquids on top

of speakers.

The exclamation point, within an equilat-

eral triangle, is intended to alert the user

to the presence of important operating

and maintenance (servicing) instructions

in the literature accompanying the prod-

uct.

Thelightningashwitharrowhead

symbol within an equilateral triangle, is

intended to alert the user to the pres-

ence of uninsulated “dangerous voltage”

within the product’s enclosure that may

beofsufcientmagnitudetoconstitute

a risk of electrical shock to persons.

EU COMPLIANCE INFORMATION:

Eligible to bear the CE mark, Conforms to

European Union EMC Directive

2004/108/EC; European Union Restric-

tion of Hazardous Substances Recast

(RoHS2) Directive 2011/65/EC; European

Union WEEE Directive 2002/96/EC.

WEEE NOTICE

Note: This mark applies only to countries within the

European Union (EU) and Norway.

This appliance is labeled in accordance with Euro-

pean

Directive 2002/96/EC concerning waste electrical

and electronic equipment (WEEE). This label indicates

that this product should not be disposed of with

household waste. It should be deposited at an appro-

priate facility to enable recovery and recycling.

C A UTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

WARNING: Do Not Open! Risk of Electrical Shock. Voltages in this

equipment are hazardous to life. No user-serviceable parts inside.

Refer all servicing to qualiﬁed service personnel.

Before placing grille on speaker, make sure there

are no vibrations when playing. If so, check the

installation screws to see if they need further

tightening

PAINTING THE SPEAKER GRILLE

This speaker grille may be painted. To apply spray

paint to the grille, follow the manufacturer’s

instructions and remember to remove the scrim

before finishing. To paint the outer bezel on press

fit speaker chassis, use the cutout template as

mask, and paint (See illustration above).

MAINTENANCE

These speakers require little maintenance and, if

cleaning is needed, you may use a dry cloth. If

the speaker is subject to smoke or grease, a mild

detergent and moistened cloth may be used. DO

NOT use harsh chemicals or abrasives.

Summary of content (2 pages)

PAGE 1
SPEAKER PLACEMENT AND LOCATION WELCOME! Optimum speaker placement depends on personal listening preference and, when used in home theater applications, follow standard listening recommendations for left, center, right andsurround usage. Thank you for purchasing our KLH Faraday In-wall speakers. We have constructed these speakers with the finest quality materials to provide many years of outstanding performance. FOR YOUR SAFETY Important Safety Instructions! 1. READ these instructions. 2.
PAGE 2
LIMITED LIFETIME WARRANTY This warranty is non-transferable, and only applies to the individual that made the original purchase. For warranty/service issues, please contact your place of purchase. Please hold on to your original receipt. The warranty covers any production and material defects of purchased product. The following is NOT COVERED by the warranty: 1. Accidents, misuse, poor maintenance, electrical overloads such as lightning or voltage. 2. No DIY, must be installed by CEDIA-qualified installer.