Wandfu BLU-RSM Bluetooth Remote Speaker Mic User Guide -0-
Wandfu Main specification Model BLU-RSM Type of Mic DSP noise cancellation Bluetooth Version V3.0 Class 2 Bluetooth Protocol HSP, HFP, A2DP, AVRCP, PTT Charging Time About 3 hours Music Playing Time About 14 hours Talking Time About 14 hours Standby Time About 500 hours Work Temperature -15℃ to 45℃ Storage Temperature --25℃ to 60℃ Type of Battery Lithium battery polymer (1600mA/3.
Wandfu Type of Jack Type of Jack diagram Control of Microphone Control of right channel Built-in Microphone is on. Need to switch off the right channel to save power consumption. Press “+” and “-“ at the same time. The right channel will be turned off and the red light flashes three times. 2-section single side earpiece Press “+” and “-“ until red/blue light flashing to turn on right channel 3-section stereo earpiece 4-section stereo earpiece Built-in Microphone is off and out Microphone is on.
Wandfu 4) Voice indicator of button operation. 5) PTT voice will adapt automatically with the surround environment. 2. Phone Call 1) Bluetooth Hands-free to answer the phone call while paring with cell phone. 2) Last call redial, 3) Answer/Reject phone call 4) Hand-free voice memory function. 5) Hand-free voice adapter automatically to surrounding noise. 3.Music play 1) Support the A2DP profile 2) Capable for listening music from cell phone or other A2DP music resource.
Wandfu In power on state, press vol“-” and PTT button for 10 seconds until the red lamp on. Upgrade Mode When connected with computer USB port, press vol “+” and switch button for 3 seconds until lamp off. Pairing BLU-RSM and Bluetooth adaptor with two way radio 1) In the power off state, long press microphone power on/off button for 8s, indicator into red and blue flash alternately. 2) When both BT mic and BT adapter red and blue indicator turn to blue flash slowly, pairing success.
Wandfu Voice control for Speaker Mic When listening to music or answering the phone call, press the Vol “+” or Vol “-”to increase the volume or decrease the volume. There’s “di”tone to indicator the voice volume to get it max or min volume. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
