Quick Guide
5
1 3 2
4
V1.0
LawMate, innovation never stops
®
PV-WB10i
Wi-Fi Booster Design DVR
Quick Guide
8. Wi-Fi Booster Operaon
5. Connuous / Moon Detecon Recording
5.1 For connuous recording, slide to C.
5.2 For Moon Detecon recording, switch to M.
Aer 10 seconds of system inializaon, the unit will be
ready for Moon Detecon recording. Once the unit detects
a movement, it will start recording and the red LED will
be on.
5.3 For snapshot funcon, please refer to the IP Quick Guide.
5.4 You can also use the PV Cam Viewer to change the recording
mode. For further details, please refer to IP Quick Guide.
2
2
5
4. LED Indicators
LED Indicators
Device Status
Solid Blue LED
Power On
Solid Red LED
Recording On
Blinking Orange LED
Solid Green LED
P2P Connected
Seaching P2P
Solid Orange LED
Blinking Green LED
Seaching IP
IP Connected
6 7
1. Names and Parts
1. Power Buon
2. Connuous Rec/
Moon Detecon Rec
3. Wi-Fi Switch
4. Power (Blue) LED
5. Record (Red) LED
6. IP (Green) LED
7. Wi-Fi (Orange) LED
8. Memory Card Slot
9. Golden Contacts
10. DC 5V In
11. USB Port
12. Default Buon
13. Wi-Fi Booster Power LED
14. WLAN LED
15. Wi-Fi Booster Reset Buon
16. Microphone
17. Lens
※ No microphones are available for USA market
9
8
321
5
4
6
7
12 11
DC In
10
2.
Package Content
Memory Card
4GB
Lock
Adapter
c
Power Adapter
DC 5V 2A
e
d
Quick Guide
LawMate, innovation never stops
®
PV-Cam Viewer
for IP Cam
App Store/Play Store
Installation Quick Guide
V1.0
LawMate, innovation never stops
®
PV-WB10i
Wi-Fi Booster Design DVR
Quick Guide
POWER
WLAN
Adapter Head
European Standard
g
USB Cable
f
a
DVR
b
Wi-Fi Booster
POWER
WLAN
3. Recording Operaon
(2)(1) (3)
3.1 Insert memory card into slot .
3.2 Plug the 5V wall adapter power supply into an electrical outlet.
8
6. Retrieving Video Footage
6.1 With memory card in the DVR, connect micro USB end
to and the other end to the computer. The blue LED will be
on and computer detects the storage. Users may browse
and operate the storage as typical folder directory.
11
6.2 Remove memory card from DVR. Insert memory card into a
card reader or memory card slot of computer. The storage
will be detected and user may browse and operate it as
folder directory, for example, rename, copy and paste,
delete.
※ Please note that video files will be named as V+year+month+day+me;
e.g. V20191130112001
7. Date and Time Seng (for Windows System)
7.1 From the desktop right-click to open Notepad, create a text
file named seme.txt
7.2 On the first line of the file, enter date and me informaon
as year.month.day hours.minutes.seconds. For example,
suppose the me is December 16, 2019 21:00. Then enter
2019.12.16 21:00:00
7.3 Save the file to the root directory of the memory card.
7.4 Insert the memory card into the slot, and power on the
device. The date and me seng is now completed. Note
that when date and me seng is completed, the
seme.txt file should not be visible when you connect the
device to the computer again.
3.3 Slide to “On” and blue LED will be solid on. The system
inializaon takes around 40 seconds. With the presence of
the red LED , it indicates that the recording is ongoing.
3.4 Connecng Your Phone to DVR
Slide to “On” and the blinking orange LED suggests
that the unit is ready for P2P connecon. For more details
about the P2P connecon guide, please refer to the IP Quick
Guide.
3.5 Reset Wi-Fi Password and SSID
In case of Wi-Fi password lost or forgoen, press and hold the
default buon for at least 4 seconds and shorter than 10
seconds; You will see all LED indicators turning on and then red,
green and orange LED turning off. Aer 40 seconds, the
presence of the flashing orange LED indicates that the unit
is ready to start the P2P connecon again (P2P password:
88888888).
3.6 Restore to Factory Sengs
To restore all sengs back to factory default, press and hold
the default buon far longer than 10 seconds; You will see
all LED indicators turning on and then red, green and orange
LED turning off. Aer 40 seconds, all the sengs will be
restored to factory default sengs. Orange LED will flash,
indicates that the unit restore to factory sengs.
1
4
5
3
7
12
7
12
7
※ Please note press and hold default buon less than 4 seconds will
be invalid.
※ Please note each me the device is switched to P2P or IP
connecon, the system inializaon takes around 40 seconds.
※ During reset or restore process, Wi-Fi switch must be turned on to
observe the orange LED.
POWER
WLAN
1617
13
15
14
POWER
WLAN
8.3 Choose Wi-Fi signal with the name of V-Cloud-****** on
smartphone to make connecon. Open any browser, enter
192.168.16.1 into the address
bar and search.
8.4 Create and type your own
password (at least 8 digits) in
the pop-up window, and then
tap “Next” as shown in
picture.
8.5 Choose a Wi-Fi signal from the list to be the uplink network.
If this Wi-Fi signal is secured, enter password to connect
and tap “Connect.”
8.6 Enter the password you
created before for the booster
and tap “Apply.” The device
will automacally reboot.
POWER
WLAN
9
Golden Contacts
8.1 Assemble the Wi-Fi booster and DVR as shown below.
Connect device with power adapter and LED will light
blue.
13
8.2 In about 30 seconds, red LED starts to flicker and the
device is ready for sengs.
13
8.7 When red LED on device
flickers again and green LED
is solid on, it means seng is
completed. You can now use
V-Cloud-****** as normal Wi-Fi signal.
13
14
8.8 To reset Wi-Fi booster, press for about 10 seconds.
(When connecng to another router, please reset the device
first.)
15
13