Instructions for use
Safeguarding the environment 4 Important notes 5 Before using the warming drawer 6 Fitting the appliance (depending on the model) 6 Electrical connection 8 Care and cleaning 9 Troubleshooting guide 10 After-sales service 10
Safeguarding the environment Disposal of packing material • The packing material is 100% recyclable and is marked with the recycle symbol . • The various parts of the packing must be disposed of in compliance with local regulations; do not disperse in the environment. The symbol on the product or on the accompanying documentation indicates that it should not be treated as domestic waste but must be taken to an appropriate collection centre for the recycling of electrical and electronic equipment.
Important notes Important: • The warming drawer must not be used by young children or the infirm without supervision. • Make sure children do not play with the appliance. • The accessible parts of the warming drawer may become hot during use; keep children away from the appliance. • Do not use abrasive materials or substances to clean the GLASS as they may damage it. • The appliance becomes very hot during use. Be careful not to touch the heating elements inside the warming drawer.
Before using the warming drawer When using the appliance for the first time, clean it as follows: - clean the surface with a damp cloth, then dry. - Preheat the empty drawer for at least 2 hours: turn the temperature knob to the max. position or select max. temperature, in order to eliminate any manufacturing residuals (grease, oil or resins) which could cause unpleasant odours during cooking. As some of these odours can be unpleasant we advise that the kitchen is well ventilated during this procedure.
Fitting the appliance (depending on the model) Height 140 mm Height 290 mm 7
Electrical connection Contact a qualified technician to carry out the appliance electrical connection. Important: Before connecting the drawer to the domestic power supply to check its operation, always make sure the drawer power cable is correctly fitted and NOT squashed or caught under or behind the drawer or a combined appliance.
Care and cleaning Important: Never use high pressure water or steam cleaners. Also, do not use: detergents containing soda, acids or chlorides, abrasive detergents (in powder or lotion), abrasive sponges (e.g. steel wool) or sponges containing residuals of abrasive detergents, descaling detergents, dishwasher detergents, oven sprays. Antislip drawer base (depending on the model) • The antislip drawer base can be pulled out to clean the bottom of the drawer.
Troubleshooting guide If the dishes or food (depending on the model) are not warm enough, make sure: • the appliance is on • the right temperature has been set • the heat openings are not covered by large dishes or soup-plates • the dishes have been warmed for a long enough time. Different factors affect the warming time, e.g.: - the material and thickness of the dishes, the load amount and its arrangement, temperature setting. - Optimum dish warming times are subjective.
Electrical connection for Great Britain and Ireland only Warning - this appliance must be earthed Socket outlet / plug (valid for both countries) If the fitted plug is not suitable for your socket outlet, please contact KitchenAid Service for further instruction. Please do not attempt to change plug yourself. This procedure needs to be carried out by a qualified technician in compliance with the manufactures instructions and current standard safety regulations.
Printed in Italy 09/08 5019 744 02021 n GB