-PIECE POURING SHIELD INSTRUCTIONS Model KN1PS This accessory has been approved for use with all KitchenAid® household Model KN 5-quart tilt-head stand mixers. 1-800-541-6390 Details Inside ® ™ FOR THE WAY 1 IT’S MADE.
IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed including the following: 1. Read all instructions. 2. To protect against risk of electrical shock, do not put mixer in water or other liquid. 3. Close supervision is necessary when any appliance is used by or near children. 4. Unplug mixer from outlet when not in use, before putting on or taking off parts and before cleaning. 5. Avoid contacting moving parts. Keep fingers out of discharge opening. 6.
Using Your Pouring Shield To Attach: To Use: 1. Turn speed control to OFF. 2. Unplug Stand Mixer or disconnect power. 3. Attach bowl and flat beater, dough hook or wire whip to the mixer. Lower and lock the motor head. 1. For best results, rotate the shield so that the motor head covers the u-shaped gap in the shield. This will position the pouring chute just to the right of the attachment hub as you face the mixer. 2. Pour ingredients into the bowl through the pouring chute.
KitchenAid® Pouring Shield Warranty for the 50 United States and District of Columbia This warranty extends to the purchaser and any succeeding owner for Pouring Shields operated in the 50 United States and District of Columbia. Length of Warranty: KitchenAid Will Pay For Your Choice of: One-Year Full Warranty from date of purchase. Hassle-Free Replacement of your Pouring Shield. To arrange for service, call the Customer Satisfaction Center toll free at 1-800-541-6390.