Instructions for use
Installation diagrams 4 Important safety instructions 6 Safeguarding the environment 9 Declaration of conformity 9 Before use 9 Existing pots and pans 9 Recommended pot bottom widths 9 Installation 10 Electrical connection 10 Instructions for use 12 Cleaning 15 Troubleshooting guide 15 Noises made by the hob 15 After-Sales Service 16 Power level table 16 3
Installation diagrams 180 mm x 230 mm 145 mm 180 mm x 230 mm 210 mm 4
Installation diagrams 770 mm 52 mm 510 mm 0 +1 0 30 mm 750 +2 mm 742 mm 483 mm R = Min. 6,5 mm Max. 8 mm Min. 50 mm 0 490 +2 mm Min. 10 cm Min. 5 mm Min. 3 cm Max.
These instructions shall also be available on website: www.kitchenaid.eu IMPORTANT SAFETY INSTRUCTIONS YOUR SAFETY AND THAT OF OTHERS IS VERY IMPORTANT This manual and the appliance itself provide important safety messages, to be read and always observed. This is the danger symbol, regarding safety, warning of potential risks to users and others.
- Do not use multi-sockets or extension cords. - Do not pull the appliance’s power cable. - The electrical parts must not be accessible to the user after installation. - The appliance is designed solely for domestic use for cooking food. No other use is permitted (e.g. heating rooms). The Manufacturer declines any liability for inappropriate use or incorrect setting of the controls. - The appliance and its accessible parts become hot during use. Care should be taken to avoid touching heating elements.
Danger of fire: do not store items on the cooking surfaces. - Do not use steam cleaners. - Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot. - After use, switch off the hob element by its control and do not rely on the pan detector. (only for appliances with glass surface). Disposal of household appliances - This product is built from recyclable or reusable materials.
Safeguarding the environment Disposal of packing The packing material is 100% recyclable and marked with the recycling symbol . The various parts of the packing must not be dispersed in the environment, but disposed of in compliance with local regulations. The symbol on the appliance or the accompanying documentation indicates that this product should not be treated as domestic waste but must be taken to an appropriate collection point for recycling WEEE.
Installation After unpacking the product, check for any damage during transport. In case of problems, contact the dealer or the After-Sales Service. For built-in dimensions and installation instruction, see the pictures in page 5. min 5 mm PREPARING THE CABINET FOR FITTING WARNING - Install a separator panel under the hob. - The lower part of the product must not be accessible after installation. - Do not fit the separator panel if an undertop oven is installed.
Electrical connection Connection to the terminal block For the electrical connection, use an H05RR-F or H05V2V2-F cable as specified in the table below.
Instructions for use Control Panel Description On/Off Bridge Zone function Timer Power management/Lock function button Cooking zone controls and corresponding display Switching the hob ON/OFF To switch the hob on, press the button for approx. 2 seconds until the cooking zone displays light up. To switch off, press the same button until the displays switch off.
Instructions for use Control panel lock This function locks the controls to prevent accidental activation of the hob. To activate the control panel lock, switch the hob on and press the Timer button for three seconds; an acoustic signal and a luminous indicator near the padlock symbol signal activation. The control panel is locked except for the switching off function. To deactivate the control lock, repeat the activation procedure. The luminous dot goes off and the hob is active again.
Instructions for use Step Control panel Display 1 + 2 Press the Power Management button to confirm the previous step The display shows 3 -/+ Press to set the chosen level amongst the different options available The light comes on together with the in-use lights for the individual cooking zones 4 Press the Power Management button to confirm the previous step The display shows the set level which flashes for approximately 2 seconds; after which the hob emits an acoustic signal and then turns its
Cleaning WARNING - Do not use steam cleaners. - Before cleaning, make sure the cooking zones are switched off and that the residual heat indicator (“H”) is not displayed. IMPORTANT: Do not use abrasive sponges or scouring pads. Their use could eventually ruin the glass. • • • • After each use, clean the hob (when it is cool) to remove any deposits and stains due to food residuals. Sugar or foods with a high sugar content damage the hob and must be immediately removed.
After-Sales Service Before contacting the After-Sales Service 1. See if you can solve the problem yourself with the help of the “Troubleshooting guide”. 2. Switch the appliance off and then on again it to see if the problem has been eliminated. If the problem persists after the above checks, contact the nearest After-Sales Service.
Printed in Italy 02/15 400010765294 n GB