Installation Instructions 36" (91.4 cm) Pro Line™ Series Commercial Style Cooktop for residential use only backguard (required for some installations) Questions regarding features, operation, performance, parts or service? Call 1-800-422-1230 or visit our web site at www.kitchenaid.com. IMPORTANT: Read and save these instructions. IMPORTANT: Installer: Leave Installation Instructions with the homeowner. Homeowner: Keep Installation Instructions for future reference.
Before you start... Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING”.
Product Dimensions backguard (shown) or island trim (see P. 4 and 7) 36" (91.4 cm) cooktop with sealed burners and TripleTier™ Flame burner shown 6-1/2" (16.5 cm) 7-1/2" (19.1 cm) 26-7/8" (68.2 cm) 36" (91.4 cm) 36" (91.4 cm) long 3-prong ground-type power supply cord 26-7/8" (68.2 cm) 6-1/2" (16.5 cm) 7-1/8" (18.1 cm) gas inlet is located 1-7/8" (4.8 cm) from back of burner box and 4-7/8" (12.4 cm) in from L.H. side of burner box 7/8" (22.2 mm) 2-3/4" (69 mm) 3/8" (9.5 mm) 22" (55.
Cabinet and Cutout Dimensions Countertop opening and clearance dimensions that are shown must be used. Given dimensions provide required clearances.
Gas and Electric Dimensions Gas supply requirements WARNING 3-prong ground-type outlet should be located on left hand side of cutout 8" (20.3 cm) max. from enclosure sidewall. 10" (25.4 cm) 14" (35.6 cm) Note: Solid side and bottom of cutout enclosure not shown. Gas supply line should be located in this area on rear or side walls, or the supply line can come up through the floor. Gas and Electric Connection Locations Explosion Hazard Use a new AGA or CSA approved gas supply line.
L.P. Gas: No attempt shall be made to convert the cooktop from the gas specified on the model/serial rating plate for use with a different gas without consulting the serving gas supplier. Conversion must be done by a qualified service technician. To convert to L.P. gas, use L.P. gas conversion kits part no. 8285442 and 8285443. The parts for these kits are in the literature package supplied with cooktop. D. Provide a gas supply line of 3/4" rigid pipe to the cooktop location.
Installation 1. use with Natural and L.P. gas. Do not use teflon tape. You will need to determine the fittings required depending on your installation. Remove the top wood sheet from over the top of the cooktop. 2. 3 front screws (3 rear screws required but not shown) Remove the shipping brackets and discard. 10. Connect flexible, stainless steel gas supply connector to the rigid gas supply line. Do not kink the connector. You will need to determine fittings required depending on your installation.
Check the operation of the surface burners Electronic Ignition System — initial lighting Surface burners use electronic ignitors in place of standing pilots. When the cooktop control knob is pushed in and turned to the “LITE” position, the system creates a spark to light the burner. This sparking continues until the control knob is turned to the desired setting. B. Standard Burner Adjustment Push in and turn each control knob to the “LO” position.
Installer checkoff list: If cooktop does not operate: If you need service: COOKTOP ✓ Check that the circuit breaker is not tripped or the house fuse blown. ✓ Check that the power supply cord is plugged into the outlet. ✓ Check that gas valves are turned to the “ON” position. ✓ See Use and Care Guide for troubleshooting list. In the event that your KitchenAid appliance should need service, call the dealer from whom you purchased the appliance or a KitchenAid-designated service company.
36" (91.4 cm) Pro Line™ Series Commercial Style Cooktop wiring diagram PLUG THE POWER CORD ON THIS APPLIANCE IS EQUIPPED WITH A THREE PRONG (GROUNDING) PLUG WHICH MATES WITH STANDARD THREE PRONG (GROUNDING) WALL RECEPTACLES NEUTRAL 5/16 WIDE BLADE LINE 1/4 WIDE BLADE 120 VAC 60 Hz 1 PHASE 15 OR 20 AMP GROUND ROUND BLADE GR OR GR/ Y GROUND BK CONNECT .250 TERMINALS BK RIB SPARK MODULE VALVE SWITCHES BK BK GR TT.B.
Instructions d’installation Table de cuisson de la série style commercial Pro Line™ de 91,4 cm (36 po) pour utilisation résidentielle seulement Dosseret (nécessaire pour certaines installations) ® ® Bien bien fabriqué For pensé, the way it’s made ® Pour toute question concernant caractéristiques, utilisation, performance, pièces ou service, téléphoner au 1-800-422-1230 ou consulter notre site Internet à l’adresse www.kitchenaid.com IMPORTANT : Lire et conserver ces instructions.
Avant de commencer... Votre sécurité et celle des autres est très importante. Nous donnons de nombreux messages de sécurité importants dans ce manuel et sur votre appareil ménager. Assurez-vous de toujours lire tous les messages de sécurité et de vous y conformer. Voici le symbole d’alerte de sécurité. Ce symbole d’alerte de sécurité vous signale les dangers potentiels de décès et de blessures graves à vous et à d’autres.
Dimensions du produit dosseret (représenté) ou bien garniture pour installation sur îlot (voir p.
Dimensions - placard et ouverture à découper Respecter les dimensions indiquées pour l’ouverture à découper et les distances de séparation. Les dimensions indiquées tiennent compte des dégagements de sécurité nécessaires.
Dimensions - Arrivées de gaz et d’électricité Spécifications de l’alimentation en gaz AVERTISSEMENT Placer la prise de courant (3 alvéoles, reliée à la terre) sur le côté gauche de la cavité d’encastrement, à 20,3 cm (8 po) ou moins de la paroi latérale de la cavité d’encastrement. 25,4 cm (10 po) 35,6 cm (14 po) Remarque : Côté plein et fond de la cavité d’encastrement pas représentés.
Propane : Ne jamais tenter, sans avoir d’abord consulté le fournisseur de gaz, de modifier la table de cuisson pour l’alimentation avec un autre gaz que celui spécifié sur la plaque signalétique. Toute conversion doit être exécutée par un technicien qualifié. Pour la conversion au propane, utiliser l’ensemble de conversion n° 8285394. Ces pièces accompagnent les documents fournis avec la table de cuisson. D.
Installation 1. 2. Ôter la feuille de bois recouvrant la table de cuisson. Utiliser uniquement un composé d’étanchéité pour jointures compatible avec le gaz naturel et le propane. Ne pas utiliser du ruban de téflon. Il sera nécessaire de déterminer quels raccords utiliser, selon la configuration d’installation. Ôter les cornières d’expédition et les mettre au rebut. 3 vis avant (3 vis arrière nécessaires mais pas représentées) 10.
Vérification du fonctionnement des brûleurs de surface Système d’allumage électronique allumage initial possible, sans qu’elles s’éteignent spontanément. Enlever le bouton de commande. Fonction de chauffage – position « LO ». Enfoncer/faire tourner le bouton de commande pour le placer à la position « POWER BURNER LO »; le brûleur TripleTier a été réglé à l’usine pour le plus petit débit de gaz permettant un réallumage fiable du brûleur à la position « SIMMER BURNER LO ».
Liste de contrôle de l’installateur : TABLE DE CUISSON Si la table de cuisson ne fonctionne pas : Si vous avez besoin de services de réparation : ✓ Table de cuisson correctement placée dans la cavité d’encastrement. ✓ Fusible grillé ou disjoncteur ouvert? ✓ Respect des distances de séparation spécifiées entre les surfaces. ✓ Cordon d’alimentation correctement branché sur la prise de courant? ✓ Aplomb de la table de cuisson avant/arrière et transversalement.
Table de cuisson de la série style commercial Pro Line™ de 91,4 cm (36 po) avec schéma FICHE DEPLUG BRANCHEMENT LE CORDON D’ALIMENTATION DE CET APPAREIL EST D’UNE FICHE THE POWER CORD ON THIS APPLIANCE IS DOTÉ EQUIPPED DE BRANCHEMENT À TROIS BROCHES (POUR LIAISON À LA TERRE) WITH A THREE PRONG (GROUNDING) PLUG WHICH COMPATIBLE AVEC UNE PRISE DE COURANT MURALE STANDARD À MATES WITH STANDARD TROIS ALVÉOLES, RELIÉE À LA THREE TERRE PRONG (GROUNDING) WALL RECEPTACLES NEUTRAL BROCHE NEUTRE 5/16 WIDE BLADE 5/16