Side-by-Side Refrigerator 1/4" (6 mm) Trim Adapter Kit Installation Instructions 1
Contents Introduction ............................................................. Decorator Panel Dimensions ................................... Parts List ................................................................. Procedure ............................................................... 2 3 3 4 Introduction RECOGNIZE THIS SYMBOL AS A SAFETY PRECAUTION Caution To avoid personal injury and property damage, observe all safety instructions. Caution To avoid personal injury, protect hands and arms.
Decorator Panel Dimensions Listed below are required height x width dimensions for decorator panels. Panels are not supplied with this kit and can be purchased locally. Caution To avoid personal injury or property damage, refrigerator panels should not weigh more than 30 pounds (14 kilograms) and freezer panels should not weigh more than 15 pounds (7 kilograms).
Procedure 9. Caution To avoid property damage, protect soft vinyl or other flooring with cardboard, rugs or other protective material. Important Save all screws and reuse in original location. 1. 2. 3. 4. Remove top trim from doors by removing screws. Remove top handle end caps by pulling out. Remove crushed/cubed ice switch cover on dispenser by pulling forward. Release bottom clips on dispenser cover by placing taped edge of putty knife underneath cover and pulling out.