5KEK1835A W10597348C_EN.
PARTS AND FEATURES PARTS AND ACCESSORIES Lid release button Water fill location Control panel Water filter 1.7 L (7 cup) Electric Kettle Water gauge window Base with power cord Underside of base with power cord wrap 2 | PARTS AND FEATURES W10597348C_EN.
ENGLISH ELECTRIC KETTLE SAFETY IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions. Misuse of appliance may result in personal injury. 2. Do not touch hot surfaces. Use handles or knobs. 3. To protect against fire, electric shock and injury to persons do not immerse cord, plugs or appliance in water or other liquid. Avoid spillage on the connector. 4.
ELECTRIC KETTLE SAFETY 7. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. 8. Unplug Electric Kettle from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance. 9. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged in any manner.
23. Refer to the “Care and Cleaning” section for instructions on cleaning the surfaces in contact with food. 24. This appliance is intended to be used in household and similar applications such as: - staff kitchen areas in shops, offices or other working environments; - farmhouses; - by clients in hotels, motels and other residential type environments; - bed and breakfast type environments. 25. The temperature of accessible surfaces may be high when the appliance is operating. 26.
ELECTRIC KETTLE SAFETY ELECTRICAL REQUIREMENTS Electrical Shock Hazard Plug into an earthed outlet. Do not remove earth prong. Do not use an adapter. Volts: 220-240 V Hertz: 50-60 Hz Wattage: 2400 W NOTE: If the plug does not fit in the outlet, contact a qualified electrician. Do not modify the plug in any way. Do not use an extension cord. If the power supply cord is too short, have a qualified electrician or service technician install an outlet near the appliance.
BEFORE FIRST USE Before first use, fill the Electric Kettle to the maximum level, then boil and discard the water. The temperature can be displayed in Celsius (C) or Fahrenheit (F). To change setting, hold the “-” and “+” buttons down at the same time. ENGLISH OPERATING THE ELECTRIC KETTLE NOTE: The Electric Kettle is designed for water only. Do not put any other liquids or substances in the Electric Kettle.
OPERATING THE ELECTRIC KETTLE HEATING WATER °C °F 50 122 55 131 60 140 65 149 70 158 75 167 80 176 85 185 90 194 95 203 100 212 The Electric Kettle has eleven programmed temperature settings. 1 Place the Electric Kettle on the base. The display will show the default temperature (100° C). Press the “+” or “-” buttons to select your desired water temperature. See the “Temperature guide” for more information. 2 Press the start/cancel button to save temperature and to begin heating the water.
ENGLISH OPERATING THE ELECTRIC KETTLE TEMPERATURE GUIDE Use this guide for outstanding results from your KitchenAid Electric Kettle.
OPERATING THE ELECTRIC KETTLE TURNING OFF THE ELECTRIC KETTLE The Electric Kettle can be turned off in several ways: 1 Press Start/Cancel while in heating mode. Unplug cord when Electric Kettle is not is use. 2 Press Start/Cancel while in Keep Warm mode. Unplug cord when Electric Kettle is not is use. CARE AND CLEANING CLEANING THE EXTERIOR IMPORTANT: Before cleaning, always disconnect the Electric Kettle from the electrical outlet. Make sure the Electric Kettle has cooled completely.
CLEANING THE FILTER The Electric Kettle features a removable mesh filter that traps scale deposits for cleaner water. The filter will need to be cleaned periodically—more often if you have hard water. 1 To access filter: Open the lid; the filter is located behind spout inside Electric Kettle. Grasp the top of the filter to remove. 2 ENGLISH CARE AND CLEANING Clean under hot water with a soft brush or cloth to remove deposits, and replace filter by sliding the filter into the slot behind the spout.
CARE AND CLEANING 3 Fill the Electric Kettle with water, bring to a boil and drain out the water. Repeat this step twice. The Electric Kettle is now ready to use. SERVICE CUSTOMER SERVICE In Australia: For any questions, or to find the nearest Authorised KitchenAid Service Centre, please find our contact details below. NOTE: All service should be handled locally by an Authorised KitchenAid Service Centre.
W10597348C_EN.
W10597348C_EN.
W10597348C_EN.
©2018 All rights reserved. Specifications subject to change without notice. W10597348C W10597348C_EN.