5KEK1522 W10530534A_01_EN.
Water Kettle INSTRUCTIONS water KEttle SAFETY Important safeguards..........................................................................................6 Electrical requirements......................................................................................7 Electrical equipment waste disposal...................................................................7 English Table of Contents PARTS AND FEATURES Parts and accessories.....................................................................
water kettle Safety w IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions. 2. Do not touch hot surfaces. Use handles. 3. Do not submerge cord, plug, or Water Kettle in water or other liquids. 4.
water kettle Safety Voltage: 220 - 240 Volts A.C. Frequency: 50/60 Hertz Wattage : 2400 Watts for model 5KEK1522E (kettle with European plug) 3000 Watts for model 5KEK1522B (kettle with British plug) English Electrical requirements NOTE: If the power cord is damaged, it must be replaced by the manufacturer or its service agent in order to avoid a hazard. Do not use an extension cord. If the power supply cord is too short, have a qualified electrician or serviceman install an outlet near the appliance.
Parts and Features usin Parts and accessories Removable filter Lid release button Water level gauge Temperature gauge Cord wrap feature (on bottom of base) Power button Temperature selector knob Base Inserting and removing the filter Inserting the filter: The filter is located behind the spout inside the Water Kettle. Open the lid. Slide the filter down into the slot behind the spout, making sure that the curve facing outward on the filter matches to the curve of the kettle.
using the water kettle Filling the Water Kettle Before using your Water Kettle, fill with water to the maximum level, boil, then discard water. IMPORTANT: The Water Kettle is designed to heat water only. Do not put any other liquids or substances into the Water Kettle. Lid release button English Before First Use Minimum fill 1.5L 1.25 L 1.0L 0.75L 0.5L MIN 1 Press lid release button to open lid. Fill Water Kettle with cold water. 2 There must be a minimum of 0.25 L to operate.
using the water kettle c Setting the water temperature 1 Slide the temperature selector knob on the base to the desired setting (50-100° C). 2 Press the POWER button on the side of the base. The controls will light up and the Water Kettle will begin to heat. NOTE: The water kettle will stop automatically once the set temperature is reached. The heating cycle can also be turned off manually by pressing POWER. 3 The temperature gauge will rise as the water heats.
care and cleaning Cleaning the Water Kettle and base IMPORTANT: Before cleaning, always English disconnect the Water Kettle from electrical outlet and make sure that the Water Kettle has cooled completely. Wash Water Kettle and base by hand with a damp cloth. Dry and polish with a soft cloth. Abrasives and scouring agents of any kind are not recommended. Descaling the Water Kettle If a commercial descaler is not available: 1. Fill the Water Kettle with white vinegar to the MIN (0.25 L) mark. 1.
Warranty and service Household KitchenAid Water Kettle warranty Length of Warranty: KitchenAid Will Pay For: KitchenAid Will Not Pay For: Europe: The replacement parts and repair labor costs to correct defects in materials or workmanship. Service must be provided by an Authorized KitchenAid Service Center. A. Repairs when Water Kettle is used for operations other than normal household beverage or food preparation. B.
© 2012 KitchenAid. All rights reserved. Specifications subject to change without notice. W10530534A W10530534A_18_BkCov.