5KCM0512A W10781760A_ENv10.
PARTS AND FEATURES PARTS AND ACCESSORIES Scale readout display Timer readout display Plunger handle Power button Lid Timer button Scale button Plunger (stainless steel mesh filter with silicone seal not shown) Control panel and LCD display Soft touch handle Dual-wall stainless steel carafe 2 | W10781760A_ENv10.
ENGLISH COFFEE MAKER SAFETY IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions. 2. Do not touch hot surfaces. Use handles or knobs. 3. To protect against fire, electric shock and injury to persons do not immerse the Coffee Maker in water or other liquid. 4.
COFFEE MAKER SAFETY 14. This product is designed for indoor household use only. Not designed for commercial use. 15. Do not overfill the Coffee Maker. 16. Pressing too fast or with more than 7 kg of force can cause burns. Keep face away from top of press. 17. Use only coarse ground coffee. Fine grind can clog the filter and create high pressure. 18. Place the Coffee Maker on a non-slip surface. SAVE THESE INSTRUCTIONS 4 | COFFEE MAKER SAFETY W10781760A_ENv10.
OPERATING THE PRECISION PRESS COFFEE MAKER IMPORTANT: Before using the Precision Press Coffee Maker, wash all parts by hand in hot, soapy water. Dry thoroughly. To avoid damage, do not wash in the dishwasher and do not immerse in water. 1 Press the POWER button to turn on the Precision Press Coffee Maker. The LCD display will read --- for a few moments before changing to 0 G and 0:00 minutes when it is ready to use. 2 Scoop coarsely ground coffee into the carafe.
USING THE COFFEE MAKER Place the lid on the carafe. Do not press the plunger. Allow the coffee to steep. A good starting point for steep time is 4 minutes. Steep for more or less time according to taste. 5 6 Slowly (10-15 seconds) and evenly press the plunger down to separate the grounds from the brewed coffee. When pressing the plunger down, ensure it is vertically positioned for a cleaner brew.
ENGLISH CARE AND CLEANING REPLACING THE BATTERIES The Precision Press Coffee Maker is powered by 2 AAA batteries (included). To replace the batteries, use a Phillips-head screwdriver to access the battery compartment on the bottom of your Coffee Maker. 1 Flip the carafe over, and use a Phillips-head screwdriver to remove the screw on the compartment cover. Lift the compartment cover as shown. 2 Replace the 2 AAA batteries in the compartment.
CARE AND CLEANING 3 Next, gently lift the top of the filter assembly to remove the mesh filter disc and the rubber gasket. You will have four separate parts to clean: the filter top, the rubber gasket, the mesh filter disc, and the filter bottom. 5 To reassemble properly, make certain that the rubber gasket is evenly centered and fully seated in position inside the filter disc assembly. 4 After removing the filter parts from the plunger, wash each thoroughly with a soft, damp cloth.
If your Precision Press Coffee Maker should fail to operate as expected, please check the following: - If coffee is too bold: Be sure to serve the coffee immediately after your preferred brew time is complete, or the coffee will continue to extract, making it stronger. Other possible fixes: Grind your coffee at a coarser grind level, and/or steep for less time. - If coffee is too weak: Either grind your beans to a finer consistency or brew for more time.
W10781760A_ENv10.
W10781760A_ENv10.
© 2015. All rights reserved. Specifications subject to change without notice. W10781760A W10781760A_ENv10.
