Technical Specs

ManualsBrandsKit Lock ManualsElectronicsSmart Card Lock

Table Of Contents

KL1100

SLEEK AND SUBTLE

KL1100 is the latest addition to the KitLock by Codelocks range of locker locks.

LOCK MANAGEMENT

Program individual or multiple locks remotely using the Codelocks Cloud Portal. Alternatively program

locally using our plug-in programmer.

STYLISH DESIGN

The slimline front plate and integrated handle adds a touch of style giving any locker or environment a

contemporary feel.

EASY OPERATION

Behind the stylish design sits an electronic latch containing the technology and power for maximum

functionality.

FUNCTIONS

Private Function

This is the default function and is already pre-

programmed in new locks. This function is used

where the same card client will be repeatedly

used, e.g. an employee/pupil with a personal

locker.

Public Function

Suitable for short term use by different users. This

mode can support up to 50 card clients. Suitable

for use in short term multi-occupancy applications

such as leisure centres, spas and hotels.

TECHNICAL SPECIFICATION

Management

Local

Using our plug-in programmer, set-up and configure the KL1100 -

Remote

Using the Codelocks Cloud Portal program individual or multiple locks

using an initialisation card Card Clients can be managed and assigned

to multiple locks and lock groups (max. 20 per client).

Low Battery Warning

Red LED will flash on opening to indicate low battery

Power

Battery Override

Connect to 5V micro USB power source for temporary power

Door Thickness

Ready to fit doors up to 25mm (1”)

Memory

Non-volatile memory will be retained

Latch

Electronic latch

Card Client Types

Master, Technician and User - supports MIFARE® Classic 1k

Installation

Vertical; Horizontal (additional components required)

Material

Mixed plastic and alloy construction

Summary of content (13 pages)

PAGE 1
KL1100 SLEEK AND SUBTLE KL1100 is the latest addition to the KitLock by Codelocks range of locker locks. LOCK MANAGEMENT Program individual or multiple locks remotely using the Codelocks Cloud Portal. Alternatively program locally using our plug-in programmer. STYLISH DESIGN The slimline front plate and integrated handle adds a touch of style giving any locker or environment a contemporary feel.
PAGE 2
PROGRAMMING Group Title Description General Initial set-up On power-up, blue & red LEDs will flash simultaneously, and the lock will be in an unlocked state. Initialise for private use Initialise for public use Change operation function 1. Touch a MIFARE card to the lock (this becomes the Master User Card) 2. A double LED flash will confirm acceptance 3. Wait 5 seconds - lock will enter private use 1. Touch a MIFARE card to the lock 2. A double LED flash will confirm acceptance 3.
PAGE 3
Add/Remove Technician Cards (Local) Note: The Codelocks Keypad Accessory Unit is required for this function 1. 2. 3. 4. Plug the Codelocks Keypad Accessory Unit into the lock Touch Master User Card to lock Press # • 04 •• on the keypad Within 5 seconds, touch Technician User Card to lock 1. If the Technician User Card already exists, it will be removed 2. If the Technician User Card does not exist, it will be added (maximum of 10) 5.
PAGE 4
LED Locked Indicator Enabled by default. To disable, you will require the Remote Card Authorisation or the optional Codelocks Keypad Accessory Unit are required: 1. Plug the Codelocks Keypad Accessory Unit into the lock 2. Touch Master User Card to lock 3. On the keypad, enter: 1. Press # • 08 • 01 •• to disable (default) 2.
PAGE 5
Open at set time Note: The Codelocks Keypad Accessory Unit is required for this function Note: Date/time must be set for this function 1. Plug the Codelocks Keypad Accessory Unit into the lock 2. Touch the Master User Card to the lock 3. On the keypad, enter: 1. Press # • 11 • •• Dual authorisation Note: Where any two Card Clients are required to open the lock (either a standalone, User Card (local), or a Remotely Authorised Card. 1.
PAGE 6
General Low battery When the battery power is low the Red LED will flash three times before the Blue LED flashes to signal acceptance of the smart card. Batteries should be changed as soon as this happens. The lock will operate for approximately 100 times with low battery. On a no-power event, power may be supplied via the USB connector on the front-plate. Use the Master User Card to open the lock and change the batteries.
PAGE 7
Create lock group Create Lock Group Initialisation card via Portal & desktop software. This card will enable RCA on the respective locks. 1. Sign into Portal - navigate to Remote Card Authorisation > Create Lock Group 2. Select lock model (KL1100) 3. Enter a name and location for your Lock Group 4. Select the timezone for the Lock Group 5. Enter the starting Lock ID - this must be an integer value. The first lock to be initialised will be assigned this ID.
PAGE 8
Add additional locks to an existing group Additional locks can be added to existing Lock Groups: 1. Sign into Portal - navigate to Remote Card Authorisation > Lock Groups 2. Select the Lock Group that you would like to add new locks 3. If you chose to not have the Portal remember the Lock Group ID, enter the Lock Group ID manually 4. Enter the starting Lock ID - this must be an integer value. The first lock to be initialised will be assigned this ID.
PAGE 9
Replace a lock within a group 1. Sign into Portal - navigate to Remote Card Authorisation > Lock Groups 2. Select the Lock Group 3. If you chose to not have the Portal remember the Lock Group ID, enter the Lock Group ID manually 4. Select the lock you wish to replace/deactivate 1. Replace: Click "Replace or Re-initialise Lock" 2. Deactivate: Click "Deactivate" 1. Note: This option deactivates the lock within the Portal. You may still need to remove the physical lock 5. Click Save & Commit.
PAGE 10
Card authorisation Lock Initialisation 1. Sign into Portal - navigate to Remote Card Authorisation > Authorise Card 2. Select card type (User, Technician or Master) 1. User: Can be permitted access to any lock or lock group selected 2. Technician: Can permitted access to any lock or lock group selected. After use on a locked Public Mode lock, lock will return to a locked state. 3. Master: Can be permitted access to any lock or lock group selected. Can also be used to transfer new settings to a lock. 3.
PAGE 11
Update lock settings Via Remote Card Authorisation, it is possible to update some lock settings by using the Master Card to transfer new commands to the lock. Settings that can be altered include: • • • • • • Set Private Use Set Public Use Set Dual Card Authorisation (Private Use Only) Set Locked Indication Set Unlock at X Time Set Unlock after X Hours Process for transferring commands to a lock: 1. Sign into Portal - navigate to Remote Card Authorisation > Lock Groups 2. Select the Lock Group 3.
PAGE 12
Blocking a Card Via Remote Card Authorisation, a User or Technician Card can be blocked. A card can only be blocked if the card UID is known. 1. Sign into Portal - navigate to Remote Card Authorisation > Clients 2. Select the Client (User/Technician Card) that you want to block. Note that multiple clients can be selected. 3. Select the Block Action and Click Save & Commit 4. Open your Codelocks Card Manager Client software (on your PC), place a Card on the USB card reader - this will become a "Block Card".
PAGE 13
Private User Closed Yes N/A - lock re-locks automatically No All No Change No N/A N/A Block MODE BEHAVIOUR Mode Behaviour Private Locked by default Public Unlocked, latch retracted by default Public Locked whilst in-use FCC FCC ID: FA5KL1100 This device complies with Part 15 of the FCC Rules.