TITAN TABLET PC7805ME USER MANUAL FCC ID: BRCPC7805ME Content 1 Preface............................................................................................................................................ 3 1.1 Acknowledgements ............................................................................................................. 3 1.2 Notes ................................................................................................................................... 3 1.3 Safety Notices ..
4.17 Accessibility .................................................................................................................... 43 4.18 Developer options ........................................................................................................... 44 4.19 About MID ...................................................................................................................... 45 5. Multimedia ........................................................................................
1 Preface 1.1 Acknowledgements Dear Customer, Thank you for purchasing our products, the HD tablet pc in 7 inch. Adopting master chip MTK8377, 2*Cortex-A9 framework and O.S. Android 4.1, CPU speed at 1.0 GHz, the device is easily compatible with third party applications. With functions like build-in 2G, 3G, WIFI, BT (optional), GPS (optional), FM (optional), Voice call etc, you can achieve wireless communication or use wireless network easily, surfing the internet whenever and wherever possible.
hard objects during use, because this may cause surface scratches on the device, battery damage, data loss or other damage to the hardware. Over-voltage, power cable strain and bending or squeezing of the power cable by heavy objects must be avoided to prevent the possibility of overheating or fire. Please do not knock, throw or prod on MID. Please avoid dropping, knobbing or curving the device. Only qualified maintenance personnel can install or repair the device.
product be exposed to a humid environment or rain as the water leaking into the device could disable it to the extent of being beyond repair. 1.4 Abbreviation/Term Abbreviatio n/ Term Full name Explanation MID Mobile Internet Device Mobile internet terminal WIFI Wireless Fidelity WLAN based on IEEE 802.11b TF Tran Flash Micro SD,super mini memory card HD High Definition Multimedia Interface 2 MID Introduction 2.1 Ready to use Battery Charging Charge the battery firstly before initial use. 2.
3 Quick Guides 3.1 Packing List Components MID Device Power Adaptor CD-ROM USB Cable HOST cable(optional ) Earphone(Optional) User Manual (Optional) Warranty Card (Optional) HD Cable (Optional) 3G USB Dongle(Optional) RJ45 USB Dongle (Optional) Leather Case (Optional) Keyboard/Mouse (Optional) TF (Micro SD) Card (Optional) Quantity 1 1 1 1 1 1 1 1 1 1 1 1 1 1 3.2 Product appearance 3.
Note: 1. Device without RESET key. Please press “Power” key and hold for 10 seconds to restart the device if it crashed. 2. Press “POWER”+“V—” at the same time for screen cut Function introduction: GPU:MTK8312 , Dual-core ARM® Cortex-A7 MPCore™at 1.3GHz processor Mali400-MP2 44.3M tri/sec and 832M pixel/sec @ 416MHz;support ANDROIED4.2 OS and FLASH Play11.1 support DDR3 1GB; support 16G FLASH,external TF card 1G~32GB storage; support 1024*768 HD 7.
Power supply Music 3.7V 3000MAH 5V/2A MP3, WAV Max output (L)5mW+(R)5mW(32Ohm) 8Kbps ~ 392 Kbps WMA、WMV、 5Kbps ~ 192 Kbps frequency 20Hz-20KHz SNR 90dB Distortion <0.05% mp4,3gp, MKV, AVI,MOV Video 1920*1088 Image view JPG, PNG, BMP, GIF E-book TXT、LRC、PDF、EPUB 5M GPS WIFI Built-in function frequency 1.
Icons Description: Icon Description Icon Description Back to main menu downloading Power status Web search Return Language search Recently viewed Functions menu WIFI Status (blue indicates Wi-Fi connected) Network status (blue indicates 2G/3G network connected) New e-mail New message Bluetooth signal Flight mode Under USB connection Under USB debugging 9
3.4 Switch on/off Switch on and unlocked: When the devices is in powered OFF mode, press and hold the Power key for 3 seconds to enter the Android startup process.
3.6 Operation of touch panel How to operate? You can browse over the user interface, main menu or applications by kinds of ways: Click: Just touch and click, when you’re going to input or choose applications on the main interface. Press on: Press on the icons or shortcut icons to open program you’d like, like textbox & linkage.
Pic. 3.2 Extend out of main interface Main interface can extend beyond of interface to provide more space for new-added shortcuts or gadgets. Pressing the blank place of interface, slide to left or to right quickly to extend to left or right of outsider interface of screen and there are two extensible interfacs available, see pic.3.3. 3.8 Apps Click on the top right corner of the screen, see pic 3.2, app after entering into the main interface, see pic 3.6.
Pic 3.6 3.9 USB Connect Storage setup Set up the storage mode before transfer files. Connect MID and computer with USB cable. Open the notice interface, (refer to chapter 2.3- Condition and Status of MID). Clicking USB Connected, open the icon of USB Storage, see pic.3.7. USB connected successfully Pic 3.7 Copy files to memory card Connect MID and computer with USB cable.
Set up storage mode. Opening the icon of my computer, check removable disk(x). Find out the target files and copy them to this removable disk(x). Click “close USB Storage device” after copy finishes. Note:You get no access to the memory card in MID when the MID is under USB Connection, but it is workable once USB Connection be breaking. 3.10 Input Text Screen Keyboard When you need to input or edite , android keyboard will show up.
3.11 Use Skills Widget interface Click “widget” or slide on the screen to left to enter into widger interface. Long press the widget to creat a shortcut, and you can enter related app quickly just through the shortcut icon on desktop. Creat a shortcut icon on desktop After enter into program interface or widget interface, longpress any icons, a shortcut icon will be created on the desktop, or press on and drug the icon to desktop.
Pic 4.1 Add Network Click icon Pic 4.2 Input network SSID,name of target network, and click “save”. Click user name saved and click “connect”. As pic 4.3 top right at screen, see pic4.2.
Pic 4.3 WIFI Status. Under WIFI Status turned on, user can see the notice at bottom right corner when WLAM network available. Connect WLAN during sleep mode. Click icon top right at screen, see pic4.3,and choose high class mode。 Click “keep Wi-Fi on during sleep” and choose accordingly the option prefer to. See pic4.4. Pic 4.4 4.2 Bluetooth(Optional) . Choose settings application on main interface. Turn on Bluetooth as shown below.
Pic 4.5 Click the target device name, input the password and choose “pair” for sure after “Bluetooth pairing request” window pop up. Click icon ,entering into the interface see pic4.6, and then you can operate accordingly. Target device name can renamed if need. Pic 4.6 4.2.1 Bluetooth setup Rename Click icon , as pic. 4.7 shown,choose “rename tablet” and change to the name as what you want.
Pic 4.7 Visibility Timeout As pic. 4.7 shown , click “visibility timeout” and choose time options accordingly. See pic4.8.(Note:visibility timeout refers to the time setup of device be visible. pic4.8 Show received files As pic. 4.7 shown,choose “show received files” and you can see all the files download or upload. Advanced setting. As pic. 4.7 shown,choose “Advanced setting” and set up accordingly, as pic4.9.
Pic 4.9 FTP Server Turn on FTP Server means access to server-side files and operation by client-side is allowed. Proximity reporter Under proximity reporter turn on, the device will prompt by make a noise when distance between the two devices is too far away or when disconnect. 4.3 Data Usage SIM Card data usage, see pic.4.10 pic4.10 WIFI data usage Click icon ,Choose “Show Wi-Fi usage”, see pic. 4.11.
Pic 4.11 4.4 More... 4.4-1 Airplane Mode Airplane mode is function for quick turn off of WIFI & SIM Card. WIFI & SIM card is out of reach under airplane mode, but it recovers once airplane mode turn off 4.4-2 VPN Open VPN and add VPN network, see pic. 4.12. Input network name and related server address, and click “save” for sure. Pic 4.12 Click VPN created , as pic.4.13 shows. Input VPN Account & password accordingly, and click “connect” to finish.
Pic 4.13 4.4-3 Tethering & portable hotspot Tethering & portable hotspot Click the app “settings” on menu interface. Make sure the device is under wifi connected. Choose More… and click “Tethering &portable hotspot”. Pic. 4.
Pic 4.15 Clicks “keep Wi-Fi hotspot on” and choose suitable period. Click icon “return” , opening portable Wi-Fi hotspot and click “setup Wi-Fi hotspot”. Pic 4.16 Set up password for network encryption, and password should no less than 8 digits. 4.4-4 Mobile Networks Data enabled Under data enabled, you can use 2G/3G network through the SIM card. Data roaming Under data roaming, you can surf the internet by SIM card in the situation of roaming.
support GSM 850/900/1800/1900MHz and 3g WCDMA 2100MHz. 3g frequency channel WCDMA 850MHz/900MHz/1900MHz is optional. See pic 4.17. Pic 4.17 (1)Access Point Name(APN) Click Mobile network settings, see as below picture 4.18: Pic 4.18 (2)Access point name (APN) Choose the corresponding connection method see as below picture 4.
Pic 4.19 Notes : (CMWAP transfers the date via GPRS, it can only visit wap webpage, but CMNET supports www browser on mobile internet, it can log in the similar web page the same as we surfing on the computer. Meanwhile, the charges for them are different.) (3)Network operator Click operator, tablet system will automatically search available networks GSM and WCDMA, see as below picture 4.20; Pic 4.20 4.
4.5 Audio Profiles Open setting and choose Audio profiles and you can choose different mode for setting see as below picture 4.21; Pic 4.21 Click General and access to setting see as below picture 4.22; Pic 4.22 Vibrate Click Vibrate which can realize the vibration effect on MID when you dial phone call, see as above picture: Volumes Click Volumes which can control the volumes of Ringtone & notifications、alarms, see as below picture 4.
Pic 4.23 Voice call ringtone Click voice call ringtone and you can choose the different ringtone as you like, see as below picture 4.24; Pic 4.24 Video call ringtone Click video call ringtone and you can choose different mode of ringtones, see as below picture 4.
Pic 4.25 System It can be checked by ON/OFF, “Dial pad touch tones”, “Touch sound”, “Screen lock sound”, “Vibrate on touch”. (Notes: except standard, silent, meeting, outdoor mode can only be chosen but not be set.) 4.6 Display 4.6-1 Brightness Click setting Apps Click Display Brightness. When pop-up brightness Settings panel, you can drag the brightness slider to adjust degree between dark and bright. See as shown picture 4.26; Pic 4.26 Once you set up the brightness, click ok. 4.
Click Setting Apps Click Displaywallpaper You can choose the wallpaper as you like, such as live wallpaper - gallery (custom) - wallpaper (system) - video wallpaper, as shown in picture 4.27; pic4.27 4.6-3 Automatic rotation System as the default open, when closed, the system will not rely on gravity induction to shift MID panel. 4.6-4 Sleep Click Setting Apps Click Display Click Sleep When pop-up the page of sleep time setting, you can choose the sleep time as you like.
pic4.28 4.6-5 Font Size Click Font Size which can adjust font size of the MID, see as below picture 4.29; Pic 4.29 4.6.6 Screen shot setting show as Pic 4.30 Pic 4.30 4.7 Storage Open setting AppsStorageDEFAULT WRITE DISK, you can choose the preferred installation space when you install new applications. Check available space of SD Card and MID.
Click storage to check total space. Internal storage Internal storage which is the system files storage space but can not check the content, see as picture 4.31; Pic 4.31 USB STORAGE USB Storage is MID NAND memory. If want to check the storage content you can go to main menufiles managements for checking. Pic 4.32 SD Card In the storage you can check the SD Card total space, available, unmount SD Card and Erase SD Card, and see as below picture 4.
Pic 4.33 Remove SD Card safely Click setting Apps Click storage Click uninstall SD Card Now you can remove the SD Card safely. Notes: If you remove the SD Card correctly, it can effectively protect it and increse the usage life of the SD Card. 4.
Pic 4.34 4.9 Apps 1. Please select setting in the application list. 2. Choose application and enter and then you can manage and delet the installed applications. In the lower left corner you can check the syetem storage space, see as below picture 4.39; Pic 4.39 3. Check internal storage space; see as below picture 4.40; Pic 4.
4. Check the running applications of their usage and available space see as below picture 4.41; Pic 4.41 4.10 Account 1. Click setting 2. Click Add account, see as picture 4.42; Pic 4.42 3. For example tap Google, see as picture 4.
Pic 4.43 4. Once login successfully you can open synchronization function, see as picture 4.44; Pic 4.44 4.11 Location access Click setting and choose location access, see as picture 4.
Pic 4.45 Google Location When you open Google location, you can fix MID position via WIFI GPS satellites Use GPS on your MID which can pinpoint your location GPS EPO assistance Use GPS assistance date (EPO) to speed up GPS positioning, but it need insert SIM Card and generate lots of traffic. EPO Setting Tap EPO Setting to check EPO position date and whether it automatically downloads. Pic 4.46 GPS GPS can speed up the fixed time of location via internet when used A GPS.
Pic 4.47 Disable after Reboot Choose disable after reboot the A-GPS will automatically closed when you reboot MID. Network Request Use network request to get your location via internet Network Used Open network used you can choose the different mode of network, see as picture 4.48; Pic 4.48 Profile selector Choose profile selector you can shift them as you like,see as below picture 4.
Pic 4.49 Location and Google search Use Location access and Google search, you can use your location information to improve search result and other services. 4.12 Security Set up screen lock You can use password and unlock pattern to lock the touch panel and protect your MID. Notes: Once you have set up the screen lock, every time when you reboot and unlock the touch screen will request to enter your password. Set up unlock pattern 1. 2. 3. 4. 5. 6. In the main menu page please click setting Application.
pic4.50 Set up unlock PIN password In main menu please tap settingsSecurityLock screenin the pop up text set area choose PINtype new PIN password(finger) and tap Nexttype again new PIN password and tap OK. Set up password In main menu please tap settingsSecurityLock screenin the pop up text set area choose Passwordtype new Password(alphanumeric) an tap Nexttype again new Password and tap OK. Unknown sources In main menu tap Settings SecurityUnknown sources, see as shown picture 4.51; Pic4.
Notes: Click unknown sources and then you can install APK files by hand successfully. 4.13 Language & input Tap settingLanguage & input. You can choose the language as you need. See as below picture 4.52; Pic 4.52 Tap settingsLanguage & inputAndroid keyboard settingsinput language, see as below picture 5.34; pic4.53 In the effective input method you can change the default language as you need. See as picture 4.
pic4.54 Return to Language & input, tap default to choose input method as you need. See shown picture 4.55; Pic 4.55 4.14 Backup and reset Tap Backup my date after you have logged in Google account and connected Wifi the system will automatically backup your date to Google server. For some reasons you have to restore the factory settings, please tap restore the factory settings.; If you want to format MID NAND, please click on Erase USB Storage and tap reset tablet is ok. See as picture 4.
Pic 4.56 4.15 Date and Time As default setting, system will set the date and time automatically by using network-provided values. Set the date and time zone by hand 1. Click settings 2. scroll down the screen and click date and time. 3. Close Automatic date & time 4. Close Automatioc time zone 5. Click Select time zone, and then choose time zone in the list. Scroll down the screen you can check more time zones.
Pic 4.57 Notes: If you use the time which network provided automatically, you are unable to set the date and time zone. 4.16 Scheduled power on off Tap settingsScheduled power on & off,to see belowhere picture to set4.58; Click here set as Click schedule on power schedule power off Turn on/off of schedule power off Pic 4.58 4.17 Accessibility 4.17-1. large text Click Large text can make the system font become larger 4.
will automatically hang up but will not turn to sleep 4.17-3.Touch & hold delay Click Touch & hold delay can adjust the delay time, see as shown picture 4.59; Pic 4.59 4.17-4. Install web scripts When you open it system will allow you install web scripts, but it will increase the security risk when you browser website. 4.18 Developer options 4.18-1 USB Debugging Once you open USB debugging, it can read the MID with some software. But when it opened the USB storage need to manually bring up before us. 4.
Pic 4.6 4.19 About MID MID status 1Enter the settings application 2 Click About MID. Can view the status information, model No., Android version, version no. and other information. 3 Click “status information”, Can view the battery status, battery, SIM status, IMEI No., IP address, etc. 5. Multimedia 5.1 Music Player In the application menu or on the desktop, click the icon Player interface, as pic 5.
Shuffle Pic 5.1 Artists Loop Playback Album Cover Stop /Play Song Name Last song Pic 5.2 Next song Drag the playback progress bar to adjust audio playback progress Music player button operation is shown in pic 5.2 5.2 Video In the application menu or on the desktop, tap the icon player interface. Video player buttons described in pic 5.
Play/Stop Adjust video playback progress Select the screen mode Pic 5.3 5.
4 Adjust the size you want, tap Crop 5 As abandon cropping, click Cancel to return to picture overview Edit 1 Click on the menu button to display the menu options 2 Tap Edit 3 In the pop-up options can be brightness, style, color, effect settings 4 Click Save 5 As abandon editing, click the Back key, in the pop-up dialog box, click NO back to picture browsing 5.
Flash light Back High range dynamic Adjust balance light Settings Panorama mode Color effects Pic 5.5 5.5 FM Radio (Optional functions) In the application menu or on the desktop, tap the icon interface Connect Headphones Select the top right corner button pic 5.6 to enter into the FM Radio Enter into the channel list Open external audio Menu Current frequen cy Favorite’s button Last channel Next channel Pic 5.6 Play /Stop Select the search, Then FM band can be found in, as 5.
Pic 5.7 Favorites: Click the button on the main interface to add to Favorites Note: Using FM Radio plug in your headphones as an antenna If no antenna, you will not be able to search the MID band radio 6 Communication function 6.1 Phone 6 Select the dialing application 7 Operate according to Figure 6.1 Call records Contacts Dial-up area Show number Call Function keys Hide dial pad Pic 6.
6.2 SMS 6.2.1 In the application menu or on the desktop, tap the icon interface to enter into the SMS 6.2.2 Select edit new message Add recipients Input the phone number directly Send message Pic 6.2 6.3 Contacts In the application menu or on the desktop, tap the icon interface to enter into the Contacts Pic 6.
Add contacts: Click the button to enter into the Add contact interface 7. Movil Teacher (Optional) 7.1 Device setting Click the "Setting" icon to enter in the setting panel. Pic 7.1 Locate and choose "Language and keyboard" and select "Voice Search" Pic 7.
Pic 7.3 Select “English” pic 7.
Under "Dialect" choose, select English(US) Pic 7.5 Select "Keyboard and Language", and select "Output of Voice Text" on the right Pic 7.6 Select “Language” Pic 7.
Select in the menu that appears "English (United States)" Pic 7.8 7.2 USER’S INTERFACE Pic 7.9 7.3NAVEGACION The main screen contains the Main Menu of each chapter. From here you can enter all of the chapters of course. There are two methods of navigation between chapters. You can move forwards and back from one chapter to another as shown in the following image.
Pic 7.10 Drag the tabs to navigate between chapters. Pic 7.
Pic 7.12 In compounds chapters touch tabs to access that section Pic 7.13 Once you enter a letter or a word in the "search query" in the dictionary, you can scroll through all the words in the dictionary, or choose the word that interests you to access more options Pic 7.
Once you choose a word from the list, you will see the dictionary. From here you can: • • • • • See the translation of the word. See the definition of the word. Practice writing. Listen to the pronunciation. Practice your pronunciation of the word. Pic 7.15 Touch the panels to access the main menu of the lessons in this chapter Pic 7.16 The main menu of the lessons allows access to each individual lesson and also displays information about your score and progress in each lesson.
Pic 7.17 To unlock the padlock and enter the next lesson, you should get 50% or more in the previous lesson Once the lock is opened, you will see the blue button 'play' to begin the next lesson As you progress through the chapter, you will have access to more lessons. You can always go back and review the finished lesson to review topics or improve your score. Pic 7.18 The lessons have several different types of activities, all complete with instructions and guidance.
Pic 7.19 8 Internet 8.1 Browser When wifi or net work is well connected, click can surf internet. As pic 7.
Pic8.1 8.2 E-mail Email application with e-mail setup wizard, can add common Web e-mail service provider (Such as Yahoo, Gmail and 163 other provider) external POP3 or IMAP e-mail account. Figure 7.2 Pic 8.
2 Input your email address and password for the email account 3 Click the Next Step button to check the mail server is available transceivers 4 Input the account name and email name, then tap Done 5 If the mailbox is available, will automatically enter your inbox B Delete mail account You can delete the set up POP3 or IMAP email account from your MID 1 taps the icon 2 Enter into your inbox 3 Click the Menu key 4 Tap the Settings 5 Right down select Delete Account 6 Click OK to remove C Send E-mail message 1
9 GPS function (optional feature) 9.1 GPS positioning 1 MID built-in GPS precise positioning satellite signal receiver. But available map is provided by third party. 2 Enter into the setting interface, click on the icon , enter in pic 9.1 Pic 9.1 After successfully positioned, blue part will be transformed into green. And display the latitude, longitude and altitude, speed, position location time. pic 9.2.
Satellite value Pic9.2 Satellite No. 10 Other Applications 10.1 Clock In the application menu or on the desktop, tap the icon Clock to enter into the Clock interface, Figure 9.1 Click the alarm settings, alarm clock can be set Clock Setting pic 10.
10.2 Calculator 1 Tap on the icon 2 Enter The calculator basic panel 3 Touch counter number on the panel or operator to calculate pic 10.2 10.3 Explorer Explorer with the TF card files or folders to copy, cut, delete, rename and other operations can also share the file, install apk and other functions In the application menu or on the desktop, tap the icon Explorer interface, Figure 9.
Pic10.3 A. Some operationgs, such as copy, cut, delete, rename, etc. Select a folder or file, long press a folder or file to enter into Figure 9.4 Interface. pic 10.
Pic10.5 C .Share the file: Select a file and long press this file, In the top click on " " In the pop-up list, select "Share" item. According to the pop-up list to select the way you want to share Pic 10.6 D. Install apk file: select the suffix. Apk file on the Explorer, pop up the installation program, follow the prompts to install third-party software E.
complete the Creat New Folder 10.4 Recorder In the application menu or on the desktop, tap the icon Recorder interface, Click the Record button to enter into the to start recording, click the Stop button to stop recording. Just click the play button to play the recording, the system automatically prompts to use this recording or to give up, please manually select. Play recordings: Select to use audio player audio, in accordance with the Explorer select the audio files, and click to play Figure10.
11 Application Installation 11.1 Installation Install third-party applications 1 Tap on "Explorer" application, select the application you want to install 2 Press and hold the application you need to install 3 Pop-up installation options, click Install apk 4 Follow the installation wizard to complete then can be run. Note: Applications only with APK suffix are compatible with system. 11.
12 Troubleshooting 1. Turn on MID slowly for the first time 。After MID system upgrading, the first time turn on the MID need to install the pre-installed applications, time in about 2-3 minutes. But it will faster later. 2. Device can not connect to Wi-Fi Ensure the router works well. Ensure the device and the wireless router is within the range of the wireless network to be connected too.
13 Updating Instruction 1. Press the “POWER button to turn off the device before updating (NOTE: Press and hold the “POWER button for at least 10 seconds if the device can not be turned on normally). Insert the Driver CD and copy the file named “MTK Android Upgrade Tool” to your computer desktop (NOTE: The device can not be updated directly from CD). Open file “ SP_Flash_Tool_v3.1332.0.187 shown as below picture. It shows as below picture after open the tool.
2. Click button“Scatter-loading”in the right, Choose file “Upgrade file”“MT8312_Android_scatter.txt”, then click “Open” ,shown as below picture. 3. After device has been turned off; connect the device to the PC by the USB cable supplied with the device.
Choose“Include this location in the search”- “MTK Android Upgrade Tool” > “Driver_Auto_Installer_v1.1236.00” > SmartPhoneDriver > “x86” > “Infs”, Click“OK”. Shown as below picture.
The “Found New Hardware Wizard” window will pop up on the bottom right corner as shown below.
4. Pull out USB cable,then click “Firmware->Upgrade” 5.
6. When the upgrading is 100% done , “Download OK”pops up. The upgrading process is done, and USB cable can be pulled out. 7. NOTE: Please don’t disconnect the USB cable during the updating process because this will cause update failure or possible system failure of the device.
FCC RF EXPOSURE INFORMATION: WARNING!! Read this information before using your phone In August 1986 the Federal Communications Commission (FCC) of the United States with its action in Report and Outer FCC 96-326 adopted an updated safety standard for human exposure to radio frequency (RF) electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies.
(2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.