1
What’s inside the box.
Lumi Elfi 1 2 3 1. Smartphone Clip 2. Motor 3. Hinge 4. Extendable Pole 4 5. Built-in Rechargeable Lithium-ion Battery 6. Built-in Button Panel (Refer to P.20) 5 7. Power Button 8. Signal Light 9. Micro USB Port 10.
1 Download App Download the Lumi Elfi App both available on iOS/Android. Operating system compatibility: iOSv9.0 or later; Android vX.X or later.
2 Turn on Lumi Elfi and Connect To turn the device on, hold the turn theseconds. device on, hold the power buttonTofor three power button for three seconds. When connected, the blue light When connected, will stay on and no longer blink.the blue light will stay on and no longer blink. Turn on device by holding the power button for three seconds. The blue light will blink when pairing with Bluetooth. Once paired via Bluetooth, the blue light will stay on and no longer blink.
6
3 7 Attach Smartphone
Attach your smartphone to the clipper vertically.
4 Rotate Horizontally Turn your smartphone Horizontally. *please make sure you follow the previous two steps to ensure your Turn your smartphone Horizontally. Lumi Elfi is facing the right direction. You want to do these two steps first to ensure For fromyour the Lumi left side, select youusing are using Elfi in its intended the Left Side from the App Setting. direction. For using from the left side, select "Left Side" from the App Settings (Refer to P.19).
Right Hand Users Left Hand Users * Refer to P.
5 Auto Face Tracking For Auto Face Tracking, press the Face Tracking button on the App. It will not automactically follow the user's through the Red Box on the screen.
12
6 Auto Face Capture - Photo Capture Users can set 1/2/3/5 seconds for automatic photo capture. With this feature, once it detects that the user is no longer moving, it will automatically capture a photo after the selected timer.
14
7 Auto Panorama On Device: Make sure the device is leveled, either by holding it still or placing on a flat surface. Then Press the Auto Panorama button on the device. It will then automatically take a 360 degree panorama shot (30 seconds). Press any button to stop anytime. On Application: Press the panorama button on the app. Make sure that your phone is leveled between -3 Degrees and 3 Degrees. Press Start. Press any button to stop anytime.
16
8 Auto Time lapse On Device: Place on a steady surface. Press Auto Time Lapse on device to perform a 360 degree, 1 hour time lapse. Press any button to stop anytime. On Application: Press the time lapse button. Make sure device is placed on a steady surface. Press Start to perform a 360 degree, 1 hour time lapse. Press any button to stop anytime.
18
Left Hand Settings Setting Countdown Alert Sound Auto Beauty Save Original Face Tracking Location Settings Left Side User For using from the left side, select "Left Side" from the App Settings.
Button Panel features Snapshot Direction Keys Zoom In Auto Panorama Switch Camera Auto Time-lapse Zoom Out 20
Application features 1 2 3 4 5 6 7 8 1. Flash Light 2. Switch Camera 3. Count Down Timer 4. Bluetooth Pair 5. Settings 6. Album 21 9 10 11 12 7. Face Tracking Mode 8. Auto Panorama Mode 9. Time-lapse Mode 10. Start / Snapshot 11. Photo Mode 12.
INNOPLAY LIMITED Unit 106A, 1/F, Enterprise Place 5W, No. 5 Science Park West Avenue, Hong Kong Science Park, Shatin, N.T., Hong Kong 新界沙田香港科學園科技大道西5號 5W企業廣場1樓106A室 innoplay.com.hk kinofi.
PRECAUTIONS Do not leave your product unattended when working where the general public could be endangered. Keep out of the reach of children. It is recommended that the equipment be removed from the support for transportation. Do not clean the product with solvents, thinners, benzene or other corrosive products.
INFORMATION FOR USERS In accordance with Article 10 of Directive 2012/19/UE of the 04/07/2012 concerning Waste Electrical and Electronic Equipment (WEEE). The above symbol, also present on equipment, indicates that, at such time as the user should decide to dispose of the equipment, it must NOT be disposed of as unsorted municipal waste, but must be collected separately. The same applies to all components of the equipment and any recharge or refill elements that the product may comprise.
FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.