BTX450 Wireless Bluetooth Speaker User Manual © 2012 Kinivo LLC. All rights reserved. Kinivo is a trademark of Kinivo LLC. Bluetooth word mark and the Bluetooth logo are registered trademarks of Bluetooth SIG. All other trade names are registered trademarks of respective manufacturers. This manual may not be copied in any media or form without the written consent of Kinivo LLC. Kinivo Product Support Online : http://support.kinivo.com Email : support@kinivo.
Table of Contents Introduction.......................................................................................... 3 Important Safety Instructions............................................................. 3 Speaker Overview................................................................................. 4 Package Contents.................................................................................. 4 Features.......................................................................................
Introduction Read all safety and operation instructions before installing and using your speakers. Warning: To reduce the risk of fire or electric shock, do not expose this speaker system to water or moisture. Important Safety Instructions Do not expose the speaker to liquid, moisture or areas of high humidity. Do not use abrasive cleaners to clean the speaker’s case as they may damage the unit. Always unplug and power off the unit before cleaning.
Speaker Overview 1. Power 5. Aux Input 2. Volume Down 6. Power Cord Input 3. Volume Up 7. USB Power Source Output 4. Bluetooth Pairing Package Contents BTX450 Speaker User Manual 3.
Supporting Bluetooth protocol v2.1+EDR and A2DP 1.2 audio streaming profile Connect an iPod or MP3 player via 3.5mm port Charge your device while listening to music via USB port Operation 1. Turn Unit On/Off Press and hold the power button for 3 to 5 seconds to turn the speaker on. Press and hold the power button to turn the speaker off. NOTE: The Bluetooth takes 2-3 seconds to switch on after the speaker is powered on. 2. Adjust Volume Press the volume button to increase or decrease volume.
For iPad, iPhone, iPod Touch Navigate to Settings > General > Bluetooth (On), then select the BTX450 to pair the speaker. For Android smartphones and tablets Navigate to Settings > Wireless & networks > Bluetooth settings while Bluetooth is enabled, then select Scan for devices. Select the BTX450 to pair the speaker. For all other devices Please follow your devices’ instructions on how to perform Bluetooth pairing. After pairing successfully, a solid blue LED light will remain. b.
. LED Indication Status LED Indicator Bluetooth Pairing mode Fast blinking blue Powered off Blue LED off Powered on On or blinking blue Battery charging Fast blinking red Low battery (not plugged in) Slow blinking red Troubleshooting 1. Unable to pair to device / Device no longer connects to BTX450 Make sure that the speakers are in pairing mode by pressing and holding the Bluetooth button on the speaker for 2 to 3 seconds (blue LED blinking rapidly).
Bluetooth profile (A2DP). To ensure the Bluetooth adapter for your computer is functioning correctly, update the drivers to the latest version. You may need to verify that your computer’s Bluetooth adapter supports A2DP (Advanced Audio Distribution Profile). 3. Error: Driver missing when trying to pair to computer The Bluetooth adapter for your computer provides the drivers for all Bluetooth speaker.
(Advanced Audio Distribution Profile) Bluetooth profile. A list of common devices that support A2DP Bluetooth Apple devices – iPhone, iPod, iPad Computers with Bluetooth adapters – Mac Pro, iMac, MacBook, MacBook Air, MacBook Pro, etc. Tablets – Windows, Apple, Android Smartphones – Android, BlackBerry, Windows, Samsung, Droids, HTC, etc. Bluetooth USB adapters (for Windows 7, Windows 8 and Vista) 2. Where can I find Windows drivers for the BTX450 speaker? The BTX450 speaker do not have external drivers.
the speaker in pairing mode and pair with the new device. If the speaker has been paired with both devices already, then simply disconnect the speaker from the first device by going to the first device’s bluetooth configuration (you might have to disable its bluetooth temporarily). Now open the bluetooth configuration of the second device and “connect” to the speaker. For example,while going from iPhone to a computer. 1. Disconnect the speaker from iPhone’s Bluetooth configuration.
Technical Specifications Power supply 100-240V, 50/60Hz Output power 2x5W (RMS) Built-in Battery Capacity 3600 mAh Speakers 2 Impedance 4 ohms Frequency response 200Hz-20KHz S/N Ratio 80dB Separation 55dB Dimensions 11.9 (W) x 3.2 (D) x 3.2 (H) in Weight 0.
Warranty 1 Year Limited Hardware Warranty. Kinivo hereby warrants to the customer of record that this product is in goodworking condition and free from defects in material or workmanship under normal use for a duration of 1 year after the date of purchase. The product has been tested to meet the highest quality standards in each testing category. In the unlikely event that the product proves to be defective, Kinivo will repair or replace the product free of charge.
Online Support / Contact Us Please visit us at support.kinivo.com or www.kinivo.com for support information, downloads and how-to’s. You may also reach us via email or live chat (details below). Kinivo Product Support Email : support@kinivo.com Live chat : http://support.kinivo.com FCC Warning This device complies with Part 15 of the FCC Rules.
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.
This page intentionally left blank
1 hardware warranty year limited Kinivo Product Support Online : http://support.kinivo.com Email : support@kinivo.