BTH410 Stereo Bluetooth Headphone User Manual © 2012 Kinivo LLC. All rights reserved. Kinivo is a trademark of Kinivo LLC. Bluetooth word mark and the Bluetooth logo are registered trademarks of Bluetooth SIG. All other trade names are registered trademarks of respective manufacturers. This manual may not be copied in any media or form without the written consent of Kinivo LLC. Kinivo Product Support Online : http://support.kinivo.com Email : support@kinivo.
Table of Contents Important Safety Instructions............................................................................3 Headphone Overview..........................................................................................4 Package Contents ................................................................................................5 Operation..............................................................................................................5 1. Turning Unit On/Off...................
Read all safety and operation instructions before using the Bluetooth stereo headphones. Warning: To reduce the risk of fire or electric shock, do not expose the product to water or moisture. Important Safety Instructions 1. Do not expose the BTH410 to liquid, moisture or areas of high humidity. 2. Do not use abrasive cleaners to clean the BTH410 as they may damage the unit. Always unplug and power off the unit before cleaning. 3. Do not expose the BTH410 to extremely high or low temperatures. 4.
Headphone Overview 1 3 5 4 6 7 2 8 9 Foldable headpiece 5. VOL+ key 2. Multifunction button & LED Indicator 6. VOL- key 7. Micro USB charging port 3. Previous song button 8. Microphone 4. Next song button 9. 3.5mm audio input 1. For additional information and features for Bluetooth controls, please refer to the Operation section of this user manual.
Package Contents BTH410 Stereo Bluetooth Headset USB Charging Cable User Manual 3.5mm Audio Cable (for wired play) Operation 1. Turning Unit On/Off Press and hold the multifunction button for 4-5 seconds until the blue LED appears to turn the headphones on . Press and hold the multifunction button for 4-5 seconds or until the red LED appears to turn the headphones off. Note: The LED and the multifunction button (MFB) are the same. 2.
3. Bluetooth Pairing a. Ensure the headphones are powered off, then enter the pairing mode on the headphones by pressing and holding the multifunction button for 7 to 10 seconds until the blue and red lights start flashing alternatively (Note - do not release when you see only the blue light) b. Follow the operating instruction of your Bluetooth device to start the pairing process.
f. Select the Headphones (Bluetooth Hands-free Audio) by left clicking the device then click ‘Set Default’. g. Hit OK to close the window. The Kinivo BTH410 headphones should now play audio from your computer. 5. To Pair with Mac OS X a. After putting the BTH410 headphones in pairing mode, click the Bluetooth tray icon then select ‘Set Up Bluetooth Device’ from the drop down menu. b. Locate the BTH410 from the devices list and click Continue. c.
Reconnect Bluetooth (in standby mode) Press any button To use this feature your mobile device must support the voice dialing function. Voice command Voice dialing 1. Press the multifunction button twice in quick succession. You will hear a beep prompt. (Siri for supported iPhones) 2. Give voice command. To use the voice features your mobile device must support the voice dialing function.
7. LED Indication Status LED Indicator Powered off Off Powered on and paired Blinks blue every 5 seconds Powered on and disconnected Blinks blue every 3 seconds Pairing mode Alternating blinking blue and red Troubleshooting 1. Unable to pair to smartphone or tablet Ensure that the headphones are in pairing mode (see Bluetooth Pairing section). Now open the Bluetooth configuration on your smartphone or tablet and scan for Bluetooth devices.
3. Lost or damaged USB cable If you have lost or damaged the included USB cable, you can use any standard Micro-USB cable or Micro-USB charger to charge the BTH410 headphones. 4. Error: Driver missing when trying to pair to computer The Bluetooth adapter for your computer provides the drivers for all Bluetooth headphones. To ensure the Bluetooth adapter for your computer is functioning correctly, update the drivers to the latest version.
Frequently Asked Questions 1. What are the BTH410 headphones compatible with? In general, the BTH410 headphones will work with devices that support the A2DP (Advanced Audio Distribution Profile), HSP (Headset Profile), HFP (Hands-free Profile), and AVRCP (Audio/Video Remote Control Profile) Bluetooth profiles. A list of common devices that support these Bluetooth profiles Apple devices – iPhone, iPod, iPad Bluetooth enabled Mac computers – Mac Pro, iMac, MacBook, MacBook Air, MacBook Pro, etc.
4. How many Bluetooth connections will the BTH410 headphones remember? The BTH410 will remember up to five previous Bluetooth connections. When the BTH410 is powered on, it will automatically connect to the last device it was connected to. 5. Can I use the BTH410 headphones for VoIP or Skype? Yes, the BTH410 headphones will switch into the Headset Profile (HSP) when the microphone is in use. 6.
Specifications Bluetooth Specification V3.0+EDR and compatible with V2.0 and V2.1 Bluetooth Profiles HSP, HFP, A2DP, AVRCP RF Frequency Range 2.4G ISM band, 2.402-2.
Warranty 1 Year Limited Hardware Warranty. Kinivo hereby warrants to the customer of record that this product is in good-working condition and free from defects in material or workmanship under normal use for a duration of 1 year after the date of purchase. The product has been tested to meet the highest quality standards in each testing category. In the unlikely event that the product proves to be defective, Kinivo will repair or replace the product free of charge.
Online Support / Contact Us Please visit us at support.kinivo.com or www.kinivo.com for support information, downloads and how-to’s. You may also reach us via email or live chat (details below). Kinivo Product Support Email : support@kinivo.com Live chat : http://support.kinivo.
1hardware warranty year limited Kinivo Product Support Online : http://support.kinivo.com Email : support@kinivo.
