BTH360-S Bluetooth Stereo Headset User Manual © 2012 Kinivo LLC. All rights reserved. Kinivo is a trademark of Kinivo LLC. Bluetooth word mark and the Bluetooth logo are registered trademarks of Bluetooth SIG. All other trade names are registered trademarks of respective manufacturers. This manual may not be copied in any media or form without the written consent of Kinivo LLC. Kinivo Product Support Online : http://support.kinivo.com Email : support@kinivo.
Table of Contents About BTH360-S....................................................................................... 3 Overview (Before Use)............................................................................. 3 Charging the headset.............................................................................. 4 First time charging.........................................................................................................4 Low battery...................................................
About BTH360-S The BTH360-S offers the convenience of bluetooth connectivity and a rechargeable battery without the hassle of wires. Overview (Before Use) Fig.
Charging the headset First time charging Before you first use your BTH360-S Bluetooth headset, please charge the battery fully. Low battery Low battery power is indicated by three “DONG” tones repeated every 30 seconds and the Red LED status indicator light blinking twice in a row. Charge the headphones using the USB cable The charging ports on BTH360-S are designed to prevent water / sweat from entering the headphones. Please use the included cable to charge the headphones from any USB charger. Fig.
1. Plug USB cable into any computer USB port or USB charger. 2. Plug opposite end of USB cable into headset’s charging port RED light on >> Charging RED light off >> Finished charging 3. It will take about two hours to charge the headset fully. Warning The internal battery is recyclable. Please contact your local electronics recycling program for disposing the headphones in a safe and environment friendly way.
Using the headset 1. Turning the headset on/off Function Operation Indicator light Turn on Press multi-function button for about 3-5 seconds. Release when the blue light blinks. Blinking blue light. Turn off Press multifunction button for about 3-5 seconds. Release when the red light blinks. Blinking red light. Note: If the headset can not connect to any devices within 5 minutes of turning on, it will shut off automatically to conserve battery life. 2.
Note: Pairing mode will last 2 minutes. If the headset can not connect to any other devices within 2 minutes, it will automatically switch to standby mode with blinking blue light. 2) Pairing with one device Before you use your headset for the first time, you will need to pair it with a Bluetooth-enabled cell phone. Pairing procedure may vary depending on the model of cell phone you use. Please refer to your cell phone user’s manual for further information. The general pairing procedure is as follows: 1.
Notes: If the pairing is not successful, please turn off the headset, then re-pair according to the steps 1-6 above. After your headset and mobile phone are successfully paired, They will remember each other so you will not need to re-pair next time. The headset can remember 8 paired devices. When the number of paired devices exceeds 8, the first device that was paired will be replaced. If you want to pair the headset with another device, please follow steps 1-6 above. 3.
Fig. 3 After putting on the headset, rotate the earplug to get the most comfortable angle. 5. Making calls Function Status of the headset Operation Cancel call Calling mode Short press (press and release) multifunction button once Answer call Ringing Short press multifunction button once Long press (press and hold) Reject call Ringing Multifunction button about 2 seconds. Release when you hear a tone.
Volume up Conversation mode Short press “+” button Volume down Conversation mode Short press “-” button Transfer call to Mobile phone Conversation mode Long press multifunction button for 2 seconds Transfer call to headset Conversation mode Long press multifunction button for 2 seconds Microphone mute Conversation mode Double-click multifunction button Cancel mute (Microphone mute) Double-click multifunction button Voice dial Standby mode (already connected with the device you are using)
Warning: Excessive pressure from earphones and headphones can cause hearing loss. Notes: Not all mobile phones support all the functions listed above. Please refer to your mobile phone’s user’s manual. The functions and prompt tones may vary by mobile phone model. When the volume is adjusted to maximum or minimum, you will hear a prompt tone. On some mobile phones, pressing the headset’s answer button may transfer the call to the mobile phone.
Volume down Playing music Short press “-” button Previous song Playing music Long press “+” button for 2 seconds Next song Playing music Long press “-” button for 2 seconds Pause Playing music Short press multifunction button Play Paused Short press multifunction button Notes: By default, some mobile phones will transmit music to the mobile phone’s speaker instead of the headset.
7.
Blue light quick blink - once every 4 seconds Conversation mode Red light quick blink - twice every 30 seconds Low battery 8. Indication tone Indication tone Status of the headset Continuous indication tone - 2 times every 5 seconds Conversation mode with microphone muted Three “dong” warning tones every 30 seconds Low battery Care and maintenance Read the following recommendations carefully before using your BTH360-S headset. Following these, you will be able to enjoy this product for many years.
prevent internal circuitry from damage, do not keep in a damp place. Keep the product away from direct sunlight or hot places. High temperatures will shorten the life of electronic devices, destroy the batteries, or distort certain plastic parts. Don’t let the headset touch hot water. Avoid exposure to cold environments. This may damage the internal circuit board. Don’t try to disassemble the product, as it may become damaged.
2. Why is the red LED off when the headset is charging? a. b. Please make sure the charging device is properly connected to the headset. After a long period of disuse, the headset’s battery may run down. In this case, you will need to charge the battery for 30 minutes, and then the red LED will come on and the headset will continue charging. 3. What is the effective range between the headset and a mobile phone? The maximum range of the headset is 10 meters.
6. Why is the voice of the person I am talking to not clear? a. Make sure your mobile phone has sufficient signal strength; and b. Make sure the headset is in the effective range. 7. Why can’t I pause, play, play the previous song, and play the next song from my headset when playing music? To enable this function, your Bluetooth device must support AVRCP (Audio/Video Remote Control profile). Notes: This device complies with Part 15 of the FCC Rules.
Talk / Music Time 6 hours Headset standby time 150 hours Charging input DC5.0V 130mA Headset charging time Approx 2-3 hours Dimension 132*134.5*61mm Weight Approx 35.3g Warranty 1 Year Limited Hardware Warranty. Kinivo hereby warrants to the customer of record that this product is in goodworking condition and free from defects in material or workmanship under normal use for a duration of 1 year after the date of purchase.
This warranty is limited to repair or replacement of the mentioned product only, is non-transferable and does not extend to any product damaged by misuse, natural disasters or any other circumstances beyond Kinivo’s control. The warranty does not cover or provide for the reimbursement or payment of incidental or consequential damage resulting from breach of the limited warranty described above.
1hardware warranty year limited Kinivo Product Support Online : http://support.kinivo.com Email : support@kinivo.