BTH240 Wireless Bluetooth Headphone User Manual © 2012 Kinivo LLC. All rights reserved. Kinivo is a trademark of Kinivo LLC. Bluetooth word mark and the Bluetooth logo are registered trademarks of Bluetooth SIG. All other trade names are registered trademarks of respective manufacturers. This manual may not be copied in any media or form without the written consent of Kinivo LLC. Kinivo Product Support Online : http://support.kinivo.com Email : support@kinivo.
Table of Contents Introduction...........................................................................................3 Important Safety Instructions..............................................................3 Headphone Overview............................................................................4 Package Contents...................................................................................5 Operation .........................................................................................
Introduction Read all safety and operation instructions before using the Bluetooth stereo headphones. Warning: To reduce the risk of fire or electric shock, do not expose the product to water or moisture. Important Safety Instructions 1. Do not expose the BTH240 to liquid, moisture or areas of high humidity. 2. Do not use abrasive cleaners to clean the BTH240 as they may damage the unit. Always unplug and power off the unit before cleaning. 3.
flammable and can cause fire if misused or defective. 12. Always dispose of the packaging and unit in accordance with the local regulations and in a responsible manner. Headphone Overview 1. 2. 3. 4. 5. 6. 7. LED indicator Volume + button Volume - button Multifunction button Micro USB charging port Previous song button Next song button For additional information and features for Bluetooth controls, please refer to the Operation section of this user manual.
Package Contents BTH240 Stereo Bluetooth Headset USB Charging Cable User Manual Carrying Pouch Operation 1. Turn Unit On/Off Press and hold the multifunction button for 4 - 5 seconds until the blue LED appears to turn the headphones on. Press and hold the multifunction button for 5 - 6 seconds or until the red LED appears to turn the headphones off. 2. Charging the Battery To charge the BTH240 headphones, connect the USB cable to the BTH240 and plug the headphones into a USB power source.
When the BTH240 has a low battery, the red light will blink intermittently and the headphones will play an audible tone while powered on. 3. Standby Mode/Idle Feature When the headphones are powered on and are inactive after several minutes of use, they will automatically enter standby mode. In this state, the BTH240 will preserve battery power. To wake the device, simple play audio with the device it is connected to or press any button on the BTH240. 4. Bluetooth Pairing a.
stereo (A2DP). b. After putting the BTH240 headphones in pairing mode, right click the Bluetooth tray icon then select ‘Add a Device’ from the context menu. Under Windows 8, type “Add a Bluetooth device” c. Locate the BTH240 from the devices list and click the Next button. d. After your computer has loaded the device and the drivers for the headphones, you should see that the device has successfully connected.
7. Button Functions Function Operation Toggle unit on/off Press and hold multifunction button for 5 to 7 seconds (blue LED blinking) Bluetooth mode While the headphones are powered off, press and hold multifunction button for 7 to 10 seconds (red and blue LED blinking alternatively) pairing Reconnect Bluetooth (in standby mode) Press any button Voice command Voice dialing To use this feature your mobile device must support the voice dialing function. (Siri for iPhones) 1.
8. Factory Reset WARNING: Performing a factory reset on the BTH240 will delete any previous pairings and will restore the headphones to factory default settings. Only perform this if you are experiencing any issues with the product. 1. Power off the BTH240 headphones. 2. Press + , – and the multifunction button - all 3 simultaneously for 6 seconds. The blue LED will blink twice and the headphones will shut off.
3. Headphones work with my smartphone but not my computer The headphones need to be supported by the Bluetooth adapter in your computer. To ensure the Bluetooth adapter for your computer is functioning correctly, update the drivers to the latest version. In addition, you may need to verify that your computer’s Bluetooth adapter supports A2DP (Advanced Audio Distribution Profile), HSP (Headset Profile), HFP (Hands-free Profile), and/ or AVRCP (Audio/Video Remote Control Profile). 4.
device list. Try to pair the headphones again. If at any point you are unable to resolve your issue, please contact Kinivo Support for assistance. Frequently Asked Questions 1. What are the BTH240 headphones compatible with? In general, the BTH240 headphones will work with devices that support the A2DP (Advanced Audio Distribution Profile), HSP (Headset Profile), HFP (Handsfree Profile), and AVRCP (Audio/Video Remote Control Profile) Bluetooth profiles.
contact Kinivo support for assistance in locating the right drivers for your computer. 3. Can I use my phone charger or car charger with the BTH240 headphones? Yes, the BTH240 can be charged from any standard USB power source, such as car chargers, phone chargers, wall chargers, or USB computer ports. 4. How many Bluetooth connections will the BTH240 headphones remember? The BTH240 will remember up to five previous Bluetooth connections.
7. Help! I’m unable to use to the headphones. What should I do? Please view the Troubleshooting section. If you are unable to find a solution you can contact us via email at support@kinivo.com. Headphone Specifications Bluetooth Specification v2.1+EDR class 2 The latest version of A2DP1.2 and AVRCP1.0 profiles support Supports Bluetooth Headset and Hands free Profile (HFP 1.5) RF Frequency Range 2.402-2.480 GHz, 2.
Normal Charging Time 2 ~ 3 hours Operating Temperature 14 °F ~ 131 °F Storage Temperature -4 °F ~ 176 °F Talk Time / Music Time Up to 10 hours Standby Time Up to 200 hours Warranty 1 Year Limited Hardware Warranty. Kinivo hereby warrants to the customer of record that this product is in goodworking condition and free from defects in material or workmanship under normal use for a duration of 1 year after the date of purchase.
fitness for a particular purpose. If your product is not functioning or you have any concerns please contact Kinivo Support before returning the product. Online Support / Contact Us Please visit us at support.kinivo.com or www.kinivo.com for support information, downloads and how-to’s. You may also reach us via email or live chat (details below). Kinivo Product Support Email : support@kinivo.com Live chat : http://support.kinivo.
1hardware warranty year limited Kinivo Product Support Online : http://support.kinivo.com Email : support@kinivo.