Operating Instructions

ManualsBrandsKingwin Information ManualsElectronicsLow Power BLE Thermo Detector

ThermoEye－M6

Non contact visual face capture

Temperature measuring

instrument

User Menu

❊

Please connect the temperature probe to the tablet or mobile phone

according to the installation process picture.

❊

Please use the product according to the app operating instructions.

Installation guide

Figure 1 ：Tablet Figure of the overall installation with the temperature probe

Figure 1

Thermo Detector

1/4 inch ﬁxed screw

Connected Stick

Connected Holder

Micro USB Power Cable

IPAD

PAD Bracket

Universal Holder

Tripod

Summary of content (8 pages)

PAGE 1
ThermoEye－M6 Non contact visual face capture Temperature measuring instrument User Menu ❊ Please connect the temperature probe to the tablet or mobile phone according to the installation process picture. ❊ Please use the product according to the app operating instructions.
PAGE 2
LED Indicator ： Normal operation (blue light ﬂashing / once every 3 seconds)Bluetooth pairing (fast ﬂashing red and blue) APP 操作说明 1. After the “ThermoEye” is powered on, the blue LED on the front of the probe will ﬂash. 2. Open the app and the LED on the front of the “ThermoEye” will ﬂash quickly(representing Bluetooth pairing). After pairing, the blue LED will ﬂash once every three seconds. 3. At this time, the app interface should instantly display "connected" for further operation.
PAGE 3
4. Refer to the app icon key description table in the key table for related key operation. 5. Enter the Real time face temperature measurement page ，please click the “ Camera ICON”。 When the face image enters the recognition frame, it will not move any more; the temperature test can be displayed in about one second Numerical value and voice play. If it is not set to the identiﬁcation box, it will remind you to enter the identiﬁcation box.
PAGE 4
6.Upload or share the photos which has already been captured and saved 7.
PAGE 5
8.
PAGE 6
Application scenarios ❊ office / factory / restaurant / School ❊ buses / subways and other means of mass transit
PAGE 7
FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
PAGE 8