Qu uick Starrt Guide e YoSm martLED DBulb MiniRe M emote C Control lyourB Bulbsb byRemo ote KinggTing Tech.
Do Not Connect to a Dimmer YoSmart Bulb dims using YoSmart remote KingTing Tech.
ON Leave Your Fixture On. KingTing Tech.
KinggTing Tech.
Fully charge your Remote before use. KingTing Tech.
Linking Before use, the LED bulb needs to link with the remote. 1. Turn off the LED Bulb by switch or Unscrew the LED Bulb ON KingTing Tech.
2. Select the LED Bulb group by tap the button a or b or c,then press and hold LINK button for 5 seconds, Remote enter linking status. KingTing Tech.
3. Turn your fixture on and when prompted, screw in the LED Bulb. ON KingTing Tech.
4. Linking complete, the LED Bulb will flash 6 times. ON You can now control your LED Bulb from the remote. KingTing Tech.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.