Motion Detector etector Motion Detector Specifications Product Name Motion Detector Brand YoSmart Model MD78-U011W Size 52x 37 x 90 90mm Power 2AA Battery Weight 48g Color White Operating environment Indoors Operating temperature range -10° to 50° 0° C Operating range 0-85% 85% relative humidity humidity Storage temperature range -4° 4° o to 158° F ((-20° to 70° C) RF Frequency US 918MHz Communication Protocol KT-LoRa Device Overview 2017 KingTing Tech.
Motion Detector etector Sensor Placement Screw the bracket to a surface and slide the bracket into theslot on the area of the sensor. YoSmart App Setup 2017 KingTing Tech.
Motion Detector etector Enhance with the YoSmart hub For text message or email alerts, your door sensor mustbe added to the hub. Add a motiondetector Follow the on-screen screen instructions to add your Motion MotionDetector to the hub. Press and hold the Set Button for about 5 secondstill the status LED is green blinking. 2017 KingTing Tech.
Motion Detector etector Test alerts To receive email and text message alerts when motionis detected. Factory Reset After factory resetting, all settings will be cleared. Carefully open the bottom case of Motion Detector. Press and hold the Set Button for about 20 seconds till there the status LED is green and red blinking alternately. Warning Refrain from using harsh chemicals or cleaning agents on thedevice. Only use a clean, dry cloth to clean the device. Do not use rechargeable batteries.
Motion Detector etector Do not puncture batteries,. teries,. Electrolyte leakage from thebatteries is corrosive and can cause serious harm to the eyes or skin. If swallowed, the electrolyte can be toxic. Do not allow conductive materials such as jewelry or metaltools to make contact with the batteries which may cause ashort circuit. With a short circuit, the batteries and conductivematerial can become extremely hot and cause burns.
Motion Detector etector This equipment has been tested and found to comply with limitsfor a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection againstharmful interference in residential installations. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause har harmful mful interference to radio communications.
FCC Caution: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.