Door Sensor and Leak Sensor Specifications Product Name Door Sensor and Leak Sensor Brand YoSmart Model DS77-U02W U02W GS77-U02W U02W, LS79-U02W. Size Main Case: 71.2 x 35.9 x 20.4mm Magnet: 71.2 x 12.3 x 20mm) Power 1 CR2 Battery (DC 3.0V) Weight 38.
Door Sensor and Leak Sensor Door Sensor Sensor Placement Peel off the tape backing and mount the sensor and magnetto a window or door. Position the sensor so that the arrows on the magnet and sensor enclosure align. 2017 KingTing Tech.
Door Sensor and Leak Sensor YoSmart App Setup Enhance with the YoSmart hub For text message or email alerts, your door sensor mustbe added to the hub. 2017 KingTing Tech.
Door Sensor and Leak Sensor Add a door sensor Follow the on-screen screen instructions to add your door doorsensor to the hub. Press and hold the Set Button for about 5 seconds till the status LED is green blinking. Test alerts When door is open or close,, you can receive app push message or mobile phone text message alerts. 2017 KingTing Tech.
Door Sensor and Leak Sensor Factory Reset After factory resetting, all settings will be cleared. Carefully open the bottom case of door sensor. Press and hold the Set Button for about 20 seconds till there the status LED is green and red blinking alternately. Water Leak Sensor Sensor Placement Located the Leak Sensor in a location that may experiencea water leak. 2017 KingTing Tech.
Door Sensor and Leak Sensor Add a leak sensor Follow the on-screen screen instructions to add your leaksensor to the hub. Press and hold the Set Button for about 5 secondstill the status LED is green blinking. Test Alerts Place your leak sensor onto a wet sponge no more than1cm deep. 2017 KingTing Tech.
Door Sensor and Leak Sensor After the test alerts, return the leak sensor to its location. Factory Reset After factory resetting, all settings will be cleared. Carefully open the bottom case of Leak Sensor . Press and hold the Set Button for about 20 seconds till the statusLED is green and red blinking alternately. 2017 KingTing Tech.
Door Sensor and Leak Sensor Warning Refrain from using harsh chemicals or cleaning agents on thedevice. Only use a clean, dry cloth to clean the device. Do not use rechargeable batteries. Do not dispose of batteries in fire as they may explode. Please follow your local battery disposal procedure. Do not puncture batteries,. Electrolyte leakage from thebatteries is corrosive and can cause serious harm to the eyes or skin. If swall swallowed, the electrolyte can be toxic.
Door Sensor and Leak Sensor as the serial number on your hub. FCC Compliance Statement This device complies with Part 15 of the FCC Rules. Operationis subjected to the following two conditions: (1) this device maynot cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment quipment has been tested and found to comply with limitsfor a Class B digital device, pursuant to Part 15 of the FCC rules.
FCC Caution： This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
