User's Manual
User's Guide
MLWG3 Getting Started
Step 1 – Charge your MLWG3
Device
Before using, make sure your MLWG3™ is
fully charged. To
charge, connect the included USB cable to
your MLWG3’s
mini USB port (1) and the other end into an
available USB
port on your computer or to a USB wall
adapter. The green
power light will stop _ashing when MLWG3
is fully charged.
Step 2 – Add Content to your
MLWG3
Windows users: When connecting your
MLWG3 to your
computer, two drive letters will appear in
Windows Explorer
— one Read-Only labeled “CDROM” and
one Removable
Disk labeled “MLWG3” Double-click on the
drive labeled
“MLWG3” to add your content. Transfer your
_les the same
as you would for any USB drive; drag or
copy _les from your
computer to your MLWG3 device
Mac users: By default when connecting your
MLWG3 to
your computer, two drives will appear on
your desktop —
one Read-Only labeled “CDROM” and one
Removable Disk
labeled “MLWG3” Double-click on the drive
labeled
“MLWG3” to add your content. Transfer your
_les the same
as you would for any USB drive; drag or
copy _les from your
computer to your MLWG3 device.
(It is recommended that you organize your
content
by creating folders, e.g., “Videos, Music,
Pictures
and Documents”)
Step 3 – Download Kingston’s Free
MLWG3 App from the
App Store
Visit Apple’s App Store and search for
“Kingston MLWG3”.
Figure 1 – Kingston’s MLWG3 App
Icon
Step 4
Power on the MLWG3 by pressing the
On/Off button
(2).*
*Note: After you power on, wait for Blue
Wi-Fi Activity
Light to start _ashing before proceeding to
the next
step(3).
Step 5
Go to the Settings icon on your iPad®,
iPhone®, or iPod® touch
and select Wi-Fi. Con_rm that Wi-Fi is ON.
Select “Kingston