0 YEAR MANUFACTURER'S KINGSTON BRASS LIMITED WARRANTY All parts of this Kingston Brass faucet are warranted to the original retail purchaser to be free azn lies from defects in material and workmanship for a period of Ten(10) years from the date of purchase as shown on the purchaser's receipt.
For Use With KB's Tub/Shower Faucet BEFORE BEGINNING INSTALLATION 1. Flush plumbing lines to clear any debris 2. Shut off both supply lines after flushing. 1 | Properly secure valve body to wood bracing using copper straps. (not included) Tum off water supply. 2 | Connect valve assembly to 1/2" supply lines. Tailpieces on valve assembly are threaded for 1/2" threaded pipe and will accept 1/2" sweat copper. 3 | Assemble 1/2" elbow and 1/2" feed nipple. Screw into bottom of valve.
(Parts: Replacement Parts Cartridge: KBRP131HC Hot Handle: KBH727PXH Cold Handle: KBH727PXC \ J CARE AND MAINTENANCE OF YOUR FAUCET Your Kingston Brass faucet has been finished to the most strict standards, however, due to the high content of minerals in the water, your finish may appear dull and famished after time. ese are some do's and don'ts to maintain the luster on your faucet for many years to come. DO 1. Use a silicon based caulking when installing. 2.