0 YEAR MANUFACTURER'S LIMITED WARRANTY All parts of this Kingston Brass faucet are warranted to the original retail purchaser to ba free from defects in material and workmanship for a period of Ten(10) years from the date of purchase as shown on the purchaser's receipt This warranty Is Limited to defective parts only, labor charges andiron damage resulting from improper installation, repair or replacements, as well as incidental and consequential damages connected therewith are excluded.
1 saa INSTALLATION INSTRUCTIONS For Use With KB's Tub/Shower Faucet BEFORE BEGINNING INSTALLATION 1. Flush plumbing lines to clear any debris. 2. Shut off both supply lines after flushing. Properly secure valve body to wood bracing using copper straps. (not included) Turn off water supply. Connect valve assembly to 1/2" supply lines. Tailpieces on valve assembly are threaded for 1/2" threaded pipe and will accept 1/2" sweat copper. Assemble 1/2" elbow and 1/2" feed nipple. Screw into bottom of valve.
Parts: Replacement Parts: (ie Hot Cartridge: KERP131HC Ee Cold Carl ridge: KBRP131CC| Diverted Cartridge: % KBRP131CD 27 28 Hot Handle: KBHBGB1 DLH = « Bs Cold Handle: KBH8S61DLC Diverted Handle: KBDHB981DL CARE AND MAINTENANCE OF YOUR FAUCET Your Kingston Brass faucet has been finished to the most strict standards; however, due to the high content of minerals in the water, your finish may appear dull and famished after time.