P-Trap Installation: 4. Waste Cover 6. Horizontal Leg = 3. Slip Joint Nut 8. Tail Piece 5. Black Washer 1. Slip Joint Nu 2. Black Washer 7. Bottle Trap Remove horizontal leg and slip joint nut from bottle rap. Apply Teflon tape to all exposed threads. Insert slip joint nut (3) and waste cover {4) onto horizontal leg (6). Insert horizontal leg into wall waste opening, do not tighten. Insert black washer (2) and slip joint nut (1)onto tail piece (8).
FAUCET INSTALLATION INSTRUCTIONS Wash Basin Pedestal Before Installation : 1. Prior the installation, unpack your new Kingston Brass product and inspect it keep the product in its original package until you are ready to install it. 2. Shut the water supply off when replacing an existing fixture. Preparation of the floors and walls, including all additional wall supports, maybe required. Observe all local plumbing and building codes. Do not install this fixture alone.
FAULTFINDER INSTALLATION INSTRUCTIONS L Shape Mounting Bracket eed Tools: Phillips Screwdriver Hammer Silicone Pencil Drill Installation: 1. 2. Once unit has been assembled place at the desired location. Gently place basin on fop of pedestal legs and very carefully place in the location where the pedestal legs will be installed and after leveling draw a line across the bottom of the basin.