STEP 3 (Recommended for professional installers only.) Attach the under mount clips. Position bowl so that reveal is equidistant Then on underside of counter top, drill holes for brass inserts of under mount clips. Use a drill bit with stop block to avoid drilling through the top. for 1/2" counter top material, drill 3/8" deep holes. Use three clips on the Lang sides of the sink, and two clips on the hart sides of the sink, or follow the Locations on the template that comes with the sink.
KINGSTON BRASS INSTALLATION INSTRUCTIONS UNDER MOUNT SINKS These instructions are for installing Kingston Brass Under mount stainless steal sinks. Under mount sinks are sinks that are mounted from below the counter top. I1f you are installing another type of sink, such as a Drop-In sink which is installed on top of the counter, please refer to instructions specifically for those sinks.
KINGSTON BR; THE TRADITION OF FINE BRASS Installation Instructions For Use With KB's Basket Strainer NOTE:USE TEFLON TAPE ON ALL THREADED CONNECTIONS Basket Drain Brady Gasket POM Washer Nut Washer Slip Nut www.kingstonbrass.