0 YEAR MANUFACTURER'S LIMITED WARRANTY Al parts of this Kingston Brass faucet are warranted to the original retail purchaser to be free from defects in material and workmanship for a period of Ten(10) years from the date of purchase as shown on the purchaser’s receipt. This warranty is limited to defective parts only, labor charges and/or damage resulting from improper installation, repair or replacements, as well as incidental and consequential damages connected therewith are excluded.
KINGSTON KA H AT INSTALLATION INSTRUCTIONS Volume Control BEFORE BEGINNING INSTALLATION: 1. Flush plumbing lines to clear any debris. 2. Shut off both supply lines after flushing. Need Tools: Basin Wrench Adjustable Wrench Teflon Tape Silicone Sealant Screwdriver 1 1. Tum off water supply. 9 ] T Face Pete Bel M Screw Cap Handle 2. Install naive assembly with " V " saps of the white plastic cam located in the front of the valve assembly points downward. 5.
Parts: Cartridge: KERP3001C Handle: KBHB&31NDL Y CARE AND MAINTENANCE OF YOUR FAUCET Your Kingston Brass faucet has been finished to the most strict standards, however, due to the high content of minerals in the water, your finish may appear dull and famished after time. ese are some do's and don'ts to maintain the luster on your faucet for many years to come. DO 1. Uso a silicon based caulking when installing. 2. Clean your faucet with only a mild soap and water solution. 3. Dry your faucet after using it.