CARE AND CLEANING For best usage, keep in mind when caring lavatory products: 1. Use a soft, ry sponge or cloth to wipe lavatory surfaces and nearby surfaces, clean and rinse completely with water immediately after applying cleaner. 2. Do not leave cleaners to soak on surfaces after each use. THE TRADITION OF FINE BRASS 3. Do not use abrasive material to clean surfaces, such as brush or scouring pad. 4. Do not leave staining materials in contact with the surface for extended periods of time. www.
KINGSTON BRASS «Conn ver pos ri # KINGSTON BRASS INSTALLATION INSTRUCTIONS SELF-RIMMING LAVATORY SINK These instructions are for installing Kingston Brass stainless steel lavatory sinks. t pr Note: recommended that all counter tops be cut and installed by an approved or certified professional. 5. Clean excess silicone around the perimeter of the sink, run water into the lavatory « Thoroughly inspect the product and all materials for any damage prior fo installation.
Iron Bathroom Console Sink Installation Base [E] PCs Screw Bolt 1Pe PCs B Pcs 20 Pcs www laughingstock TOLL-FREE CUSTOMER SERVICE: 1-877-2-BRASS TECHNICAL SUPPORT E-mail: 12775 Reservoir Street, Chino, CA91710 TOOLS REQUIRED I Allen Wrench Installation Steps: Step 1. Thread adjustable leg screws "G" to the bottom of parts A&B. Step 2. Locate part C and join parts attaching part "C" to the top rear of the support assembly using the attached Allen bolts "IT". Step 3.