KINGSTON BRAS. e L e Parts: Cone Washer Lock Nut & Pop-Up Coupling Nut \>—4 @ PCs PCs 1Pc www.kingstonbrass.
L OF FINE BR INSTALLATION INSTRUCTIONS For Use With KB's Twin Handles Lavatory Faucet with Pop-Up BEFORE BEGINNING INSTALLATION 1. Flush plumbing lines to clear any debris. 2. Shut off both supply lines after fishing. (1] (2] 1. Shut off hot and cold water supply under sink. Plug sink drain with cloth to avoid losing small parts. Remove old faucet 2. Insert the Inst shanks through th sink holes, and press down. Assemble the washers and luck nuts on the inlet shanks, and then tighten the nuts by hand.
Parts: Replacement Parts: Hat Cartridge: KSRPLCAQ0OHC Cold Cartridge: KSRPLCA000CC Hot Handle: KSH2851DFLH Cold Handle: KSH2851DFLC) CARE AND MAINTENANCE OF YOUR FAUCET Your Kingston Brass faucet has been finished to the most strict standards; however, due tn the high content of minerals in the water, your finish may appear dull and famished after time. These are some do's and don'ls to maintain the luster on your faucet for many years ta come. Do 1. Use a silicon based caulking when installing.