Rubber Washer| Ult & & Pop-Up Lock Nut Lock Nut 1Pe PCs 1Pe 1 www laughingstock TOLL-FREE CUSTOMER SERVICE: 1-877-2-BRASS TECHNICAL SUPPORT E-mail: 12775 Reservoir Street, Chino, CA31710
Need Tools: = INSTALLATION INSTRUCTIONS For Use With KB's Twin Handles Faucet with or without Pop-Up Basin Wrench Adjustable Wrench Teflon Tape Silicone Sealant Screwdriver BEFORE BEGINNING INSTALLATION 1. Flush plumbing lines to clear any debris. 2. Shut off both supply lines after flushing. Faucet Shank Washer Lockout 4. Shut off hot and clad water supply under 2 Insert the inlet shanks through the sink 7. Place pivot rod into pivot rod opening. 8. Guide the pivot rod through one of the sink.
Parts: Replacement Parts: Hot Carl ridge KSRPLZD0DHC Cold Cartridges: KSRPL2000CC e Hot Hands: KBH1601 AXH S Cold Handle: KB 601 AXC CARE AND MAINTENANCE OF YOUR FAUCET Your Kingston Brass faucet has been finished to the most strict standards; however, due to the high content of minerals in the water, your finish may appear dull and famished after time. These are some do's and don'ts to maintain the luster on your faucet for many years to come. Do 1. Use a silicon based caulking when installing. 2.