KINGSTON BRAS. THE TRADITION OF FINE BRASS Parts: Cone Washer Lock Nut & Coupling Nut & @ e PCs PCs www.kingstonbrass.
s INSTALLATION INSTRUCTIONS For Use With KB's Twin Handles Kitchen Faucet BEFORE BEGINNING INSTALLATION 1. Flush plumbing lines to clear any debris. 2. Shut off bole supply lines after flushing. 1 1. Shut off hot and cold water supply under sink. Plug sink drain with cloth to avoid losing small parts. Remove old faucet 2. Set the faucet in place, instar the inlet shanks Through the sink holes, and press down. Assemble the washers and lockouts on the inlay shanks, and then tights the nuts by hand.
Parts: Replacement Parts: Hot Cartridge KSRPL2000HC Cold Cartridges: KSRPL2000CC 329 Hot Handle: KBH1601 PK 329 (Cal Handle: KBH1601PKXC| [P ) CARE AND MAINTENANCE OF YOUR FAUCET Your Kingston Brass faucet has been finished to the most strict standards; however, due tn the high content of minerals in the water, your finish may appear dull and famished after time. These are some do's and don'ls to maintain the luster on your faucet for many years ta come. Do 1. Use a silicon based caulking when installing.