Parts: Cone Washer Lock Nut & Pap-Up Coupling Nut @ e PCs PCs 1Pc www.kingstonbrass.
Need Tools: INSTALLATION INSTRUCTIONS % = For Use With KB's Twin Handles Lavatory Faucet with Pop-Up M %m %& Basin Wrench ~ Adjustable Wrench Teflon Tape Silicone Sealant ~ Screwdriver BEFORE BEGINNING INSTALLATION 1. Flush plumbing lines to clear any debris. 2. Shut off both supply lines after flushing. Shut off hot and clad water supply under 2 Insert the inlet shanks through the sink 7. Claps pivot rod into pivot rod opening. 8. Guide the pivot rod through one of the sink.
Replacement Parts: g Carbide: KERP101C 3 Hot Handle: KBHE01ALH S Cu old Handle: KBHED1 ALC CARE AND MAINTENANCE OF YOUR FAUCET Your Kingston Brass faucet has been finished to the most strict standards; however, due tn the high content of minerals in the water, your finish may appear dull and famished after time. These are some do's and don'ls to maintain the luster on your faucet for many years ta come. Do 1. Use a silicon based caulking when installing.