Parts: Metal Nut | Cons Washer & & Pop-Up Locke Nut | Coupling Nut @ 1Pc PCs 1Pc www.kingstonbrass.
i o 5 INSTRUCTION For Use With KB's Single Handle Faucet with or without Pop-Up BEFORE BEGINNING INSTALLATION 1. Flush plumbing lines to clear any debris. 2. Shut off both supply lines after Rushing. [1] 1. Shut off hot and cold water supply under 2. Insert the inlet shanks through the sink holes, sink. Plug sink drain with cloth to avoid and press down. Assemble the washers and losing small parts. Remove old faucet lockouts on the inlet shanks, and then tighten the nuts by basin wrench.
Replacement Parts: Parts: Cartridge: KBRP521C Handle: KBH3401PL CARE AND MAINTENANCE OF YOUR FAUCET Your Kingston Brass faucet has been finished to the most strict standards; however, due tn the high content of minerals in the water, your finish may appear dull and famished after time. These are some do's and don'ls to maintain the luster on your faucet for many years ta come. Do 1. Use a silicon based caulking when installing. 2 Clean your faucet with only a mild soap and water solution 3.