Sades Parts: Lock Nut (Cone Washer & & Push Drain Coupling Nut : @ 1Pc PCs 1Pc www.kingstonbrass.
x INSTALLATION INSTRUCTIONS For Use With KB's Single Handle Faucet with or without Push Drain BEFORE BEGINNING INSTALLATION 1. Flush plumbing lines to clear any debris. 2. Shut off both supply lines after flushing. Need Tools: Basin Wrench Adjustable Wrench Teflon Tape Silicone Sealant ~~ Screwdriver 1 5 PUSH é Drain Plug Flange Opening Teflon Tape Mounting Nut 1. Shut aff hot and cold wale supply under 2. Insert tha inlet shanks through the sink 5. Thread mounting nut and bosom gasket 6.
Replacement Parts: Cartridge: KSRP3881C Handle: KSH7811BL CARE AND MAINTENANCE OF YOUR FAUCET Your Kingston Brass faucet has been finished to the most strict standards; however, due tn the high content of minerals in the water, your finish may appear dull and famished after time. These are some do's and don'ls to maintain the luster on your faucet for many years ta come. Do 1. Use a silicon based caulking when installing. 2 Clean your faucet with only a mild soap and water solution 3.