0 YEAR MANUFACTURER'S LIMITED WARRANTY All parts of this Kingston Brass faucet are warranted to the original retail purchaser to be free from defects in material and workmanship for a period of Ten(10) years from the date of purchase as shown on the purchaser's receipt This warranty is limited to defective parts only, labor charges candor damage resulting from improper installation, repair or replacements, as well as incidental and consequential damages connected therewith are excluded.
i] i : INSTALLATION INSTRUCTIONS For Use With KB's Wall Mount Tub Filler With Hand Shower BEFORE BEGINNING INSTALLATION 1. Flush plumbing lines to clear any debris. 2. Shut off both supply lines after flushing Need Tools: bn Basin Ranch Adjustable Ranch Es [ws Teflon Tape Silicone Sealant Screwdriver 1] 2] Apply Teflon tape B 2. Apply Teflon tape on the threads of the copper shank. Install the elbow. §. Place a washer baleen the side hale of the shower cradle and the cone nut of the shower hose.
KINGSTON BRASS THE TRADITION OF FINE BRASS INSTALLATION INSTRUCTIONS For Use With KB's Shower Riser Bath Supply BEFORE BEGINNING INSTALLATION: 1. Flush plumbing lines to clear debris in pipe and plumbing lines to avoid existing clogs into waterway & cartridge system of new faucet fixture. 2.
Installation manual for hand shower Put a washer lo the cone shape hose nut and hand tightens the hand shower clockwise. 2. Turn on the water and check for leaks, If the hand shower leaks at the connection to the hos, hand Ugh ten the connection some mots. Installation manual for pull-out & pull-down sprayer. Thread hose to spray head and fade from the lop Into the faucet spout, tum the spout bo the right or to the left fully to facilitate the insertion of the hose. 2.
INSTALLATION INSTRUCTIONS For Use With KB's Hand Shower Sets, Shower head Sets Basin Wrench Adjustable Wrench Teflon Tape Silicone Sealant and Kitchen Sprayer G2 Before installation: Su Flexible Watt Hold the existing shower arm up and down to ensure Ihe plumbing behind the wall is Pipe Wrench Screwdriver Stipple Lina d Plumber's Putty rigid lo hold the weight of the new shower unit about 3-4 Ibs when filled with water. Installation manual for shower arm & shower head: Place tha fang lino the shower rod.
re Double Offset Bath Supply Installation = Parts: Cone Washer & | Cone Washer & Coupling Nut | Coupling Nut & Escutcheon Friction Ring Friction Ring (34° IPS) (12 IPS) PCs PCs PCs www laughingstock TOLL-FREE CUSTOMER SERVICE: 1-877-2-BRASS TECHNICAL SUPPORT E-mail: 12775 Reservoir Street, Chino, CA91710 Before starting the installation: Double offset supply lines are designed to bs installed on tubs that are configured for ub wal mount faucets, the supply lines should be installed in a plumb vertical posit
KINGSTON BRAS, / THE TRADITION OF FINE BARBS www.kingstonbrass.
KINGSTON BRAS THE TRADITION OF FINE BRASS INSTALLATION INSTRUCTIONS For Use With KB's Brass Claw foot Tub Bath Drain Note:1. Observe all local plumbing and building codes. TOOLS REQUIRED Drain Wrench Adjustable Wrench Teflon Tape Silicone Sealant Screwdriver Pipe Wrench INSTALLATION INSTRUCTIONS 1.Place rubber washer (10) onto waste tube (9) and set them under the tub. 2.