0 YEAR MANUFACTURER'S LIMITED WARRANTY Al parts of this Kingston Brass faucet are warranted to the original retail purchaser to be fees from defects in material and workmanship for a period of Ten(10) years from the date of purchase as shown on the purchaser's receipt This warranty is limited to defective parts only, labor charges and/or damage resulting from improper installation, repair or replacements, as well as incidental and consequential damages connected therewith are excluded.
BEF INSTALLATION RUCTIONS For Use With KB's Deck Mount Tub Filler With Hand Shower ORE BEGINNING INSTALLATION 1. Flush plumbing lines to clear any debris. 2. Shut off both supply lines after fishing. Ned Tools: Fef) =3 Basin Wrench Adjustable Wrench o [y, = Teflon Tape Silicone Sealant Screwdriver 1] o= Apply Teflon tape 6] 1. Shut off main water supply valve before installation. 2 Apply Teflon taps on he Reads of the copper shank. Install the risers. 6.
Replacement Parts: 5 Hot Cartridge KSRPT1000HC 4 Cold Cartridge: KSRPT1000CC Parts: Diverts Cartridge Handle: CCML1 . J CARE AND MAINTENANCE OF YOUR FAUCET Your Kingston Brass faucet has been finished to the most strict standards; however, due tn the high content of minerals in the water, your finish may appear dull and famished after time. These are some do's and don'ls to maintain the luster on your faucet for many years ta come. Do 1. Use a silicon based caulking when installing.
Straight Offset Bath Supply Installation Parts: Cong Rather & | Conan Washer & Coupling Nut& | Coupling Nut& Escutcheon Friction Ring Friction Ring (34" IPS) {12 IPS) SHE PCs PCs apes www.kingstonbrass.
KINGSTON BRAS, /s THE TRADITION OF FINE BARBS www.kingstonbrass.
KINGSTON BRAS THE TRADITION OF FINE BRASS INSTALLATION INSTRUCTIONS For Use With KB's Brass Claw foot Tub Bath Drain Note:1. Observe all local plumbing and building codes. TOOLS REQUIRED Drain Wrench Adjustable Wrench Teflon Tape Silicone Sealant Screwdriver Pipe Wrench INSTALLATION INSTRUCTIONS 1.Place rubber washer (10) onto waste tube (9) and set them under the tub. 2.
KINGSTON THE TRADITION OF WINE BRASS Installation Instructions For Use With KB's Straight Stop Instructions: 1. Apply thread sealant tape to threads (1). 2. Screw valve body (2) onto pipe (3). 3. Place nut (4), metal washer (5) and rubber washer (6) on tube (7). 4. Insert tube (7) into valve. 5. Wrench tighten nut (4) onto valve. 6. Stop any leaks by tightening nuts slightly. www. Kingstonbrass.