KINGSTON BRAS. THE TRADITION OF FINE BARBS Installation Instructions For Use With KB's Angle Stop Instructions: 1. Place nut (4) and ring (3) on tube (2). 2. Insert tube (2) into valve. 3. Wrench tighten nut (4) onto valve. 4. Repeat steps 1 through 3 with the other side. 5. Stop any leaks by tightening nuts slightly. N W A www.kingstonbrass.
INSTALLATION INSTRUCTIONS For Use With KB's Push Drain with or without Overflow Need Tools: Basin Wrench ~ Adjustable Wrench Teflon Tape Silicone Sealant Screwdriver INSTALLATION: 1. Remove the lockout, washer(6) and rubber gasket{5) from the drain body(3). 2. Insert the drain assembly downward through the drain opening on the bottom of sink. So the tailpiece(8) and the outer threads of drain body(3) can go all the way through the drain opening and expose beneath the sink. 3.
KINGSTON BRA. THE TRADITION OF FINE BRASS Installation Instructions For Use With KB's Bottle-Trap Instructions: 1. Remove horizontal leg and slip joint nut from bottle trap. 2. Apply Teflon to all exposed threads. 3. Insert slip joint nut(2) and waste cover(3) onto horizontal leg(5). 4. Insert horizontal leg into wall waste opening, do not tighten. 5. Insert slip joint nut(1) and Holder(8) onto tail piece(7). 6. Attach bottle trap(6) to tail piece and hand tighten slip joint nuf(1). 7.