Product Specs

ManualsBrandsKINGSIGNAL ManualsElectronicsWiFi mesh MT1

Registered trademark of KINGSINAL. All trademarks mentioned in this manual are

owned by their respective owners.

The product specifications and information mentioned in this manual are for reference only and

are subject to change without prior notice. Unless otherwise agreed, this manual is only used as

a guide, and the statements made do not constitute any form of warranty.

Address: 23-27 / F, block B, building 10, No. 1819, Shahe West Road, Nanshan District, Shenzhen,

China

Company website: http://www.kingsignal.cn

Technical support hotline: 0755-8631 9150

Summary of content (7 pages)

PAGE 1
Registered trademark of KINGSINAL. All trademarks mentioned in this manual are owned by their respective owners. The product specifications and information mentioned in this manual are for reference only and are subject to change without prior notice. Unless otherwise agreed, this manual is only used as a guide, and the statements made do not constitute any form of warranty. Address: 23-27 / F, block B, building 10, No. 1819, Shahe West Road, Nanshan District, Shenzhen, China Company website: http://www.
PAGE 2
Product appearance（1.2） 1. System LED Green Light On — The connection between the main route and the node is normal and can be connected to the Internet. Blue Light Flashing — Mesh device is searching. Red Light On — Normal connection, weak signal from slave node. Red Light Flashing — There is no Internet connection or the slave node cannot connect to the main route. 2. Port POWER — Used to connect matching power adapters. LAN — Used for connecting computer, set-top box and other wired equipment.
PAGE 3
Schematic of hardware connection（3.4） POWER：Used to connect matching power adapters. WAN：Used for connecting broadband interfaces such as broadband Modem or cell. LAN：Used for connecting computer, set-top box and other wired equipment.
PAGE 4
Set router for the first time after boot（5.6） Set management instructions through APP 1. Connect router to factory default wireless name with mobile phone. 2. After the connection is successful, turn on the mobile phone "Elven Guest" APP and automatically jump to the management interface; Create administrator password, click save. 3. After selecting a good time zone, click Save. 4. Manual choice of Internet access, please set the Internet access parameters according to the actual situation.
PAGE 5
Frequently Asked Questions（9） Why the login page does not appear after entering the URL Http://192.168.6.1. ·Make sure the computer is set to get IP automatically. ·Make sure the browser tries to enter Http://192.168.6.1. ·Try using another browser ·Restart the router and try again. What if there's no Internet? ·Please check that the computer is connected to Modm using a network line. If not, please contact your network service provider. ·Login Http://192.168.6.
PAGE 6
·Try rewiring the router or restoring factory settings Cell phones, tablets, laptops, no Internet access? ·Make sure your device's wireless function is in normal condition. If the wireless switch is on, you can search for wireless signals. ·Please make sure that the wireless router settings are correct. Please do not use Chinese or special characters for wireless names. ·Please make sure you fill in the wireless password correctly. Product warranty card（10） Dear user, Hello! Welcome to KINGSIGNAL products.
PAGE 7
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.