Owner's Manual Original Instructions Window Type Air Conditioner Thank you for choosing our product. Please read this Owner’s Manual carefully before operation and retain it for future reference. If you have lost the Owner's Manual, please contact the local agent or visit www.gree.com or send an email to global@cn.gree.com for the electronic version.
GJC14BM-A3NRNC5A GJC14BM-A3NRND2A GJC18BM-D3NRNC5A GJC18BM-D3NRND2A GJC18BY-D3NRNC5C GJC18BY-D3NRND2C
Contents Operation and Maintenance Operation Notices Installation Installation Notice Safety Precautions..........................1 Precautions.....................................4 Parts Name.....................................5 Installation and Maintenance.........17 Preparation before installation.......19 Window Types and Requirements..22 Operation Guide Function and Control.......................6 Introduction of remote controller .....9 Instruction for fan direction adjusting.....................
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure they are away from the appliance.
To prevent injury to the user or other people and property damage, the following instructions must be followed. Incorrect operation due to ignoring of instructions may cause harm or damage. The seriousness is classified by the following indications. ƽ ! WARNING This symbol indicates the possibility of death or serious injury. ! CAUTION This symbol indicates the possibility of injury or damage to property. Meaning of symbols used in this manual are as shown below. NEVER DO THIS. ! ALWAYS DO THIS.
! CAUTION When the air filter is to be removed, do not touch the metal parts ofthe unit. ● It may cause an injury. ! ● ● ● ● Do not use strong detergent such as wax or thinner but use a soft cloth. Appearance may be deteriorated due to change of product color or scratching of its surface. ! ● This could injure the pet or plant. ● An It may cause electric shock and damage. ● Do not use this air conditioner to preserve precision devices, food, pets, plants, and art objects.
Operation of Current Device Please contact Customer Service. with a new cord - please contact Customer Service.
Precautions Warning Air Conditioner should be properly grounded. Incorrect grounding may cause electric shock. Do not connect air conditioner to multipurpose socket.Otherwise, it may cause Do install the air switch. If not, it may cause malfunction. Do not spill water on the remote controller, otherwise the remote controller may be broken. Do not spray water on air conditioner. It may cause electric shock or malfunction. personal injury or damage.
Parts Name Air outlet frame Fan direction adjusting rod Control panel Air-in panel Power cord NOTE:Panel outlook picture, just for reference, please take the real unit as standard.
Function and Control After putting through the power, air conditioner will give out a sound and indicators on control panel will be on. After that, you operate the air conditioner through remote controller or control panel. Light indicates the unit is in the temperature or delay time Set mode.
Press this button can turn on or turn off air conditioner. NOTE:Press this button to turn on air conditioner, the unit will operate in Energy Save mode; if the unit is energized after power failure, the unit will still operate according to the status before power failure. Mode button Press this button can your required operation mode in turn. Corresponding indicator will be on.
Filter check button After fan rotates for 250h totally, lamp of cleaning filter is on to remind customer clean it. Note: When user cleaned the filter, press Filter check button to clear the operation time. Meanwhile, the warning indicator will turn off. / button Under temperature setting status, after each pressing of “ ” or “ ” button, temperature will increase or decrease 1° . Temperature setting range: ~ ° .
Introduction of remote controller Note: This is a general use remote controller, it could be used for the air conditioners with multifunction; For some function, which the model doesn’t have, if press the corresponding button on the remote controller that the unit will keep the original running status.
- / + button Pressing + or - button once will increase or decrease set temperature by 1°F(°C). Hold + or - button for 2s, set temperature on remote controller will change quickly. Release the button after your required set temperature is reached. Under timer setting status, after each pressing of “+” or “-” button, time will increase or decrease 0.5h . Hold “ +” or “-” button, 2s later, time displayed on dual-8 nixie tube will change quickly.
Replacement of Batteries in Remote Controller 1. Press the mark “ ” on back cover of batteries box cover for remote controller with fingers as shown in the fig, and then remove the batteries box cover along the arrow direction. Battery 2. Replace with two #7 (AAA 1.5V) dry batteries. Make sure positions for “+” pole and “-” pole are correct. 3. Reinstall batteries box cover.
Instruction for fan direction adjusting You can adjust the fan direction adjusting rod to select left&right air outlet direction according to your requirement. Fan direction adjusting rod You can adjust the air outlet frame to select up&down air outlet direction according to your requirement.
Clean and Maintenance Warning ! " $ conditioner to avoid electric shock. % * " <= % * " " " > " = " 1.
# $ % & & ' ( & & Please check below items before asking for maintenance. If the problem still can't be solved, please contact dealer or professional person. Phenomenon &( | " } \ " $ " } ! } \ ` X " } Air conditioner can't operate $ XX "]} * ]= Q " $= Ask prof
Whether air outlet or air inlet is blocked? Under heating mode, whether indoor temperature is reached No fan blowed to set temperature? out from air conditioner Whether heating mode is started up just now? Eliminate the obstacles. Indoor unit will stop blowing fan after reaching to set temperature. In order to prevent cold air, air conditioner will delay for a while to be started up, which is the normal phenomenon.
Warning \ ` ! " X ^ " the power immediately. After that, please contact dealer at once.
Installation and Maintenance Warning {! * "" $ * $ = % X $ _ = $ "" X = | ! prevent electric shock, casualty and other accidents. % $ ) & * % , & % 0 Installing the unit in the following places may cause malfunction.
1 0 & $ % % % $ % 1. Must follow the electric safety regulations when installing the unit. = $ " " ] $ " ^ > " ? "] and air switch. 3. Make sure the power supply matches with the requirement of air conditioner. [ !" "] $ X ] " " <^? X " = 4. Please make sure the power supply complies with the requirement of air conditioner.
Preparation before installation Tools for installation Phillips screwdriver Level bar Screwdriver Scissors Pencil Measuring tape Window type unit Products and spare parts list Sealing strip ( without adhesive) Upper guide rail Sealing strip ( with adhesive) Sponge Left tripod (1) Right tripod (1) Supporter (2) Fixing bracket for window (2) Type A screw (10) Type C screw (4) Remote controller Type E screw (4) Batteries 19 Type F screw (2) Owner's manual
Window types and requirements Note: ! " "" = \ types of window, you may need to adjust the window. \ ] "" X "" ^ ] X ] !" !_ ]= |" > X for details. "" $ " ! ? " strap, brick or metal.
Installation procedure 4 1 % & 1. Hold the clasps at the two sides of panel; pull out the panel to a certain degree along the arrow direction and then lift the panel upwards to remove it. < ?" " X * = Note: For some types of panel, pull out the bottom to a certain degree and then lift the panel upwards to remove it.
screw at the two sides of outer case, and then pull out the main unit from the outer case. (It is advised that two persons handle this operation, one person holding the outer case and the other person holding the clasp of main unit and pulling out the main unit from outer case.) outer case grounding screw main unit 5.Tear off the binder fixing gasket and then take out the gasket and binder. gasket Step 2: Install upper guide rail 1.
6 ) & 7 8 &% = " " !" " $ rails. !" !" !" !" = " " !" $ " = = !" ] = ? $ ] X " ^ " " = A: Tighten screws from inside to outside of outer case.
9 %; & & Stick the sealing strip (with adhesive) at the bottom of window frame. sealing strip (with adhesive) < ) & % & 1. Put the outer case at the windowsill, and the lower guide rail should be stuck to the windowsill.
2. Install the supporter to the tripod with screw; clamp the supporter at the "" X < ^ ? and outdoor unit with screw. left tripod supporter right tripod type F screw outer case type E screw supporter ?$ 3.
= !" ] Z = screw = ) & "8 %; $ ? $ ! < = plastic window wooden window > & & Plug the sealing strip (without adhesive) in the window.
? ) & 1. Ask two persons to push the main unit slowly into the outer case. 2. \ "" $ $ ? " * = screw screw grounding screw = \ "" ? = case at the top of outer case, and then push the bottom of front case) ķ ĸ 2
= X!" ?" "= 2
GREE ELECTRIC APPLIANCES, INC. OF ZHUHAI Add: West Jinji Rd, Qianshan, Zhuhai, Guangdong, China, 519070 Tel: (+86-756) 8522218 Fax: (+86-756) 8669426 E-mail: global@cn.gree.com Web: www.gree.