4 MICROPHONE SYSTEMS
⑦ ⑧ 1. Power switch : Press to turn it on/off 2. OLED display panel: Display all information like the frequency channel and group of the microphone. 3. Menu control: The main control to change frequency, group and channel by turning from left to right. Press to confirm the freguency, group or channel. 4. IR Launcher :To submit matching signal to the receiver on the IR window of the microphone in order to make microphone match the same channel with this receiver. 5.
14)Power switch 15) IR window: It receive the IR signal here from the receiver to complete the IR matching for microphone and receiver. 16)LCD Display: Display frequency infromation 17)Power Switch: Turnit on/off by IR pushing 18)Audio Input Interface. 19)LED Indicator: Light when turn on. Flashes when low power. 20)Battery Store. 21)Antenna How to operate 1) Turn on the receiver by pressing the switch, the OLED show "ON" and then enter into the operation interface.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.