Test Report No.: T51810270248TY Date: SEP 11, 2018 Page 1 of 19 6CKUJCPUJKYGPEWP\JGPZKPOGKTK[QPI\JKRKPEJCPI 01 -#0 :+ +0&756+#. #4'# 5*# :+ 6190 <*10) 5*#0 %+6; The following samples were submitted and identified by/on behalf of the client as: INFLATABLE BOUNCER Item No. : 06 06 06 06 Supplier : 06 56;.' %1//1&+6; /() .6& Manufacturer : 6CKUJCPUJKYGPEWP\JGPZKPOGKTK[QPI\JKRKPEJCPI Country of Origin : GUANGDONG Country of Destination : UNITED STATES Labe
Test Report No.: T51810270248TY Date: SEP 11, 2018 Test Requested 1. 2. Page 2 of 19 Conclusion For compliance with the test requirement of ASTM F963-17 Standard Consumer Safety Specification on Toy Safety. ASTM F963-17 Standard Consumer Safety Specification for Toy Safety -PASS CPSIA section 101 and US California Proposition 65 (Superior Court of California – County of Alameda Case No.
Test Report No.: T51810270248TY Date: SEP 11, 2018 Page 3 of 19 Results: ASTM F963-17 STANDARD CONSUMER SAFETY SPECIFICATION FOR TOY SAFETY AS SPECIFIED IN ASTM F963-17 STANDARD CONSUMER SAFETY SPECIFICATION ON TOYS SAFETY Clauses relevant to the item: Clause 4 4.1 4.2 Description Safety Requirements Material Quality ** Flammability Test 4.3 4.3.5 Toxicology Heavy Elements 4.3.5.1 Heavy Elements in Paint/Similar Surface Coating Materials 4.3.5.2 Heavy Metal in Substrate Materials 4.7 4.9 4.12 4.
Test Report No.: T51810270248TY Date: SEP 11, 2018 Page 4 of 19 Result Page: Flammability Test (Clause 4.2) Flammability Test on Solid Sample INFLATABLE BOUNCER Burning Rate (inch/sec) 0.01 Requirement: A toy / component is considered a “flammable solid” if it ignites and burns with a self-sustaining flame at a rate greater than 0.10 in/sec along its major axis. ASTM F963-17, Clause 4.3.5.1 – Heavy Elements in Paint/Similar Surface Coating Materials Method: With reference to CPSC-CH-E1003-09.
Test Report No.: T51810270248TY Date: SEP 11, 2018 Page 5 of 19 Soluble Heavy Metal Content Test Item(s) Pb Sb As Ba Cd Cr Hg Se MDL (ppm) 5 5 2.5 10 5 5 5 10 Migration Limit (ppm) 90 60 25 1000 75 60 60 500 Specimen No. Mass of trace amount (mg) Adjusted Migration Result(s) (ppm) 1 37.5 ND ND ND ND ND ND ND ND 2 / ND ND ND ND ND ND ND ND 3 / ND ND ND ND ND ND ND ND 4 / ND ND ND ND ND ND ND ND 5 34.
Test Report No.: T51810270248TY Date: SEP 11, 2018 Page 6 of 19 ASTM F963-17, Clause 4.3.5.2 – Heavy Elements in Substrate Materials Method (non-metallic materials): With reference to CPSC-CH-E1002-08.3 Method: With reference to ASTM F963-17 Clause 8.3 Analysis was performed by Inductively Coupled Plasma Optical Emission Spectrometer (ICP-OES) Total Lead Content Test Item(s) MDL (ppm) Total Limit (ppm) Specimen Description Lead (Pb) 10 100 Result(s) (ppm) 1.
Test Report No.: T51810270248TY Date: SEP 11, 2018 Page 7 of 19 Soluble Heavy Metal Content Test Item(s) Pb Sb As Ba Cd Cr Hg Se MDL (ppm) 5 5 2.5 10 5 5 5 10 Migration Limit (ppm) -- Other Than Modeling Clays 90 60 25 1000 75 60 60 500 Migration Limit (ppm) -- Modeling Clays 90 60 25 250 50 25 25 500 Specimen No.
Test Report No.: T51810270248TY Date: SEP 11, 2018 Page 8 of 19 Test Item(s) Pb Sb As Ba Cd Cr Hg Se MDL (ppm) 5 5 2.5 10 5 5 5 10 Migration Limit (ppm) -- Other Than Modeling Clays 90 60 25 1000 75 60 60 500 Migration Limit (ppm) -- Modeling Clays 90 60 25 250 50 25 25 500 Specimen No.
Test Report No.: T51810270248TY Specimen Description: 1. White rubber core (Elastic band) 2. Green woven w/ white plastic sheet backing (Bouncer) 3. Yellow woven w/ white plastic sheet backing (Bouncer) 4. Blue woven w/ white plastic sheet backing (Bouncer) 5. Dark blue woven w/ white plastic sheet backing (Bouncer) 6. Black mesh (Bouncer) 7. Black woven (Binding) 8. Black woven band (Handle) 9. Red woven (Binding) 10. Black woven band (Hanger) 11. Yellow fabric (Bouncer) 12.
Test Report No.: T51810270248TY Date: SEP 11, 2018 Page 10 of 19 Specimen Description: 29. Orange soft plastic (Ball) 30. Yellow soft plastic (Ball) 31. Blue soft plastic (Ball) 32.
Test Report Note: No.: T51810270248TY Date: SEP 11, 2018 Page 11 of 19 - ppm = parts per million - ND = Not Detected (lower than MDL) - MDL = Method Detection Limit = 10 ppm - 1% = 10000 mg/kg = 10000 ppm - The result(s) is (are) calculated using the minimum specimen weight for composite test. - Result(s) is(are) extracted from report No. T51810230557TY. CPSIA and US California Proposition 65 (Superior Court of California – County of Alameda Case No.
Test Report Note: No.: T51810270248TY Date: SEP 11, 2018 Page 12 of 19 - ppm = parts per million - ND = Not Detected (lower than MDL) - MDL = Method Detection Limit = 10 ppm - 1% = 10000 mg/kg = 10000 ppm - The result(s) is (are) calculated using the minimum specimen weight for composite test. - Result(s) of specimen No.1-No.3&No.5-No.8 is(are) extracted from report No. T51810230557TY. US 16 CFR Part 1307 – Phthalates Content Method: With reference to CPSC-CH-C1001-09.
Test Report No.: T51810270248TY Test Item(s) Specimen No. CAS No. Date: SEP 11, 2018 Page 13 of 19 Result (s) (%) MDL (%) Permissible Limit (%) -- 3 4 Dibutyl Phthalate (DBP) 84-74-2 ND ND 0.003 0.1 Benzylbutyl Phthalate (BBP) 85-68-7 ND ND 0.003 0.1 Di-(2-ethyl hexyl) phthalate (DEHP) / Dioctyl Phthalate (DOP) 117-81-7 ND ND 0.003 0.1 Diisononyl Phthalate (DINP) 28553-12-0 68515-48-0 ND ND 0.010 0.1 Diisobutyl phthalate (DIBP) 84-69-5 ND ND 0.003 0.
Test Report No.: T51810270248TY Test Item(s) Specimen No. CAS No. Date: SEP 11, 2018 Page 14 of 19 Result (s) (%) MDL (%) Permissible Limit (%) -- 7 8 Dibutyl Phthalate (DBP) 84-74-2 ND ND 0.003 0.1 Benzylbutyl Phthalate (BBP) 85-68-7 ND ND 0.003 0.1 Di-(2-ethyl hexyl) phthalate (DEHP) / Dioctyl Phthalate (DOP) 117-81-7 ND ND 0.003 0.1 Diisononyl Phthalate (DINP) 28553-12-0 68515-48-0 ND ND 0.010 0.1 Diisobutyl phthalate (DIBP) 84-69-5 ND ND 0.003 0.
Test Report No.: T51810270248TY Date: SEP 11, 2018 Page 15 of 19 Specimen Description: 1. Grey coating on woven (Pattern) + Yellow coating on woven (Warning, pattern) + Black coating on woven (Pattern, lettering) 2. Green coating on woven (Pattern) + White coating on woven (Pattern) 3. Green woven w/ white plastic sheet backing (Bouncer) + Yellow woven w/ white plastic sheet backing (Bouncer) + Blue woven w/ white plastic sheet backing (Bouncer) 4.
Test Report No.: T51810270248TY Date: SEP 11, 2018 Page 16 of 19 California Prop 65 Phthalates Content Method: With reference to CPSC-CH-C1001-09.3 Analysis was performed by Gas Chromatography Mass Spectrometer (GC-MS) Test Item(s) CAS No. Result(s) (%) MDL (%) Specimen No. -- 1 2 3 Di-(2-ethyl hexyl) phthalate (DEHP) / Dioctyl Phthalate (DOP) 117-81-7 ND ND ND Test Item(s) CAS No. 0.003 Result(s) (%) MDL (%) Specimen No.
Test Report No.: T51810270248TY Date: SEP 11, 2018 Page 17 of 19 Specimen Description: 1. Yellow coating on woven (Warning, pattern) w/ Black coating on woven (Pattern, lettering) w/ Grey coating on woven (Pattern) 2. Green coating on woven (Pattern) + White coating on woven (Pattern) 3. Green woven w/ white plastic sheet backing (Bouncer) + Yellow woven w/ white plastic sheet backing (Bouncer) + Blue woven w/ white plastic sheet backing (Bouncer) 4.
Test Report No.: T51810270248TY Date: SEP 11, 2018 Sample Picture (As received) Pic.1 Pic.2 Pic.3 Pic.
Test Report No.: T51810270248TY Date: SEP 11, 2018 Sample Picture (As received) Pic.5 Pic.