SDS

The MIBRO Group Material Safety Data Sheet MSDS: Flexible PVC
Prepared On (d/m/y): 30/03/2016 Page 1 of 6
Updated On (d/m/y): N/A
ISSUE DATE: MARCH 30, 2016
REVISION DATE: N/A
MIBRO MSDS #: 00-0012
SECTION 1: CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Product Name: Flexible Polyvinyl Chloride
(PVC) Compound
Synonyms: Chloroethylene Homopolymer Compound
Chemical Formula (C2H3Cl)n
CAS Name & No. Not Applicable (Mixture)
Distributor's Name The MIBRO Group
Distributor’s Address 111 Sinnott Road
Toronto, Ontario
Canada M1L 4S6
MSDS Contact Product Development & Marketing Department
416-285-9000
SECTION 2: COMPOSITION/INFORMATION ON INGREDIENTS
Compounded PVC is an inert material in its normal usage. All the components listed below are encapsulated in the PVC matrix.
Typical compositions are listed below:
COMPONENT Wt.%
Polyvinyl Chloride Polymer 45 80%
Inert Fillers 0 40 % CACO3, talc, carbon black, TiO2, clay
Heat Stabilizer 3 10% Organo-metallic compounds of barium and/or calcium-zinc
Plasticizer 0 60 % High molecular weight esters
Colorant 0 5% Organic and inorganic colorants
SECTION 3: HAZARDS IDENTIFICATION
PRECAUTIONARY INFORMATION
CAUTION: If proper procedures for processing PVC compounds are not followed, processing vapors can be liberated at elevated
temperatures. The presence of these vapors may result in exposure. Additionally, the composition of these vapors may vary widely
according to the individual processing procedures and materials used. Processors must determine for themselves the appropriate
equipment and procedures for their use.
POTENTIAL HEALTH EFFECTS
Primary Routes of Exposure: Inhalation of processing emissions during periods of elevated temperature.

Summary of content (6 pages)