KS-N13 KS-N13 Max User Manual
Cautions Electric scooter is a recreational personal transporter. Before mastering riding skills, you need to do practice. You will be responsible for any injuries or damage caused by a rider’s inexperience or failure to follow the instructions in this manual. Please understand that you can reduce the risk by following all the instructions or warnings in this manual, but you cannot eliminate all the risks. Please following the local traffic laws or restrictions when riding into public areas.
Please do not use the other chargers to charge E-scooter, Only use King Song supplied charger. Please do not charge E-scooter, if the charger or power outlet is wet. Please do not disassemble the scooter body or other modify without professional person from distributors. Please do not allow others to ride your e-scooter unless he/her has carefully read and follow the instructions in this manual.
Contents 1. Product Details--------------------------------------------------------01 2. Features ----------------------------------------------------------------04 3. Button Usage ----------------------------------------------------------05 4. Assembly and Set-up------------------------------------------------06 5. APP Usage ------------------------------------------------------------07 6. Learn to Ride-----------------------------------------------------------08 7.
1. Product Details 1.
1.2 Functions Power button Dashboard Headlight Bell Brake handle O EC S D 88.
1.3 Specifications 03 Model No KS-N13 Size 8.5 inch Inner Honeycomb 10 inch Inner Honeycomb Tyre / Inflatable Tyre Tyre / Inflatable Tyre Top Speed 30km/h 40km/h Mileage Around 25kms Around 40kms Grade-ability Around 14°/ Around 25% Around 20°/ Around 36% Battery Capacity 37V, 8Ah 48V, 10.4Ah Running Condition -10℃/+50℃; 0-85% Humidity Storage Condition -20℃/+60℃; 0-85% Humidity Max Load 120kg Charger Input: 100-240V; Output: 42V/2A Input: 100-240V; Output: 54.
User Height 150-200cm Parking Mode Kick-stand Cruise Control System Control Suspnesion Front and Rear Suspension Reminder Mechanical Bell Accelerator Throttle Button Brake Front Drum Brake + Rear Disc Brake + EABS Display LED Battery Display 5 Bars in monitor Dimension(Unfold) 1170*570*1190mm 1230*570*1270mm Dimension(Folded) 1170*570*510mm 1230*570*540mm Net Weight 21kg 24kg Packing List(pcs) User Manual*1, Certificate*1, Charger*1, Screws*5, Hex Wrench*1 2.
Low Voltage / Overcurrent / Overcharging Protection. • Digital Speedometer Display, Easy to Read Speed. • Real-time 5 Bars Battery Display. • 1~4 Speed Gear, Press Button to Switch. • Malfunction Display. 3. Button Usage • Power ON/OFF: Long press the button for 3 seconds, all icons are lighting, showing speed & battery. ECO D S 88.8 MPH KM/H V A 00.0 V A • Headlight ON/OFF: Click the button (Headlight ON: 00.
P1 V A P3 V A P4 V A • Click the button for 3 times to switch display of speedometer km/h / voltage V / current A. 37.0 00.0 00.0 4. Assembly and Set-up 1. Unfold the handlebar stem and fasten it. 2. Firmly connect the wires inside the handle and the stem. Slide the handle onto the stem.
4.Tighten the screws onto three sides of the stem with the hexagon wrench. 4.After the assembly, press the power button to check if it's working properly. 8 88. MPH H KM/ O EC S D 5. APP Usage 5.1 First Ride Mobile device Requirement: iOS 10.0 or above, Bluetooth 4.0 or above. Install the APP and register/login. Android 4.3 or above, Install the APP and register/login.
iOS ! Android Please give the corresponding permission to scooter APP, to ensure the APP can run normally in your mobile device. Open Bluetooth/location (or GPS), Click ‘Search’ - -> Click the corresponding model KS-N13 in device list to connect. The E-scooter will beep when APP is connected with E-scooter. 6. Learn to Ride • Step 1: Check E-scooter Status Check the environment whether it’s safe to ride without hurting yourself or others. Check the battery level and remain mileage in APP.
• Step 2: Wear protective equipment. • Step 3: Try to slide with one leg. 09 • Step 4: Touch the throttle slightly and try to put two leg on the deck.
• Step 5: During riding, try to release the throttle and pull the brake lever. • Step 6: Try to use the headlight. 7. Safety Instruction • Wear protective equipment. • Avoid riding in the rain when possible.
• Do not load over 120kg. • Ride slowly in special cases. • Do not place one foot on the • Do not tread the back of the deck or on the ground when fender. riding.
• Do not touch the disc brake. • Do not leave your hands during riding. • Do not ride upstairs or downstairs, or over obstacles. • Do not hold a child during riding.
• Do not ride on highway or motor vehicle road. • Do not ride with sharp turn. 8. Cruise Control Open cruise-control in APP, while you keep the same speed, riding for 3~5 seconds, the E-scooter will be in cruise-control mode(running at constant speed on flat road) Please use cruise-control only on flat road, or you will fall down on other roads.
9. Error Description Display Defect Description Solutions EO Wrong in communication 1. Check whether the display control board is well connected; 2. Replace the display. 3. Replace the control board. E1 Encounter obstacles that E-scooter can’t get over it E3 Hall is abnormal E4 Brake system malfunction 1. Release the brake. 2. Restart. 3. Replace the brake lever. E5 Throttle fault 1. Release the accelerator. 2. Restart. 3. Replace the accelerator. 1. Release the accelerator and stop braking.
15 BL Low voltage alarm 1. Stop riding and get scooter charged. 2. Restart. 3. Check if firmware has been wrongly upgraded. 4. Replace the control board. BH High voltage alarm 1. Check whether scooter has been fully charged, riding the scooter at low speed, avoiding braking suddenly when scooter is fully charged. 2. Restart. 3. Check if firmware has been wrongly upgraded. 4. Replace the control board. BP Over voltage, emergency 1.
2. Check whether the motor wire is damaged, and whether the temperature signal wire of the motor wire is short-circuited to the ground. 3. Replace the motor. H2 Control board high temperature 1. Stop riding or riding scooter at low speed, avoiding climbing. 2. Check the installation of control board radiator. 3. Replace the control board. H3 Control board super high temperature 1. Stop riding or riding scooter at low speed, avoiding climbing. 2. Check the installation of control board radiator. 3.
S2 Lack of phase, mos tube drive failure 1. Restart and turn scooter on as static, avoiding turning on scooter while advancing. 2. Replace the control board. SN Lack of series number 1. Check whether the firmware version is correct. 2. Reset the serial number. 10. Folding and Carrying ① ② Fold Open Make sure that the scooter's turned off.
Carry Hold the handlebar stem with either one hand or both hands to carry. 11. Adjusting the disc brake Brake Cable If the brake is too tight, use the hexagon wrench to loosen the screws on the caliper, and slightly send back the brake cable to shorten the exposed length, then tighten the screws. If the brake is too loose, loosen the screws, and slightly pull out the brake cable to lengthen the exposed length, then tighten the screws.
12. Adjust the handlebar If the handlebar and its stem sway during riding, use the hexagon wrench to tighten the screws on the folding mechanism. 13. Battery 13.1 Temperature Effect on Battery Battery power will vary with the temperature, mileage per charge will have slight difference under different temperature, and following table is just for your reference.
13.2 Charging The device has a built-in lithium battery, no extra battery installation is required, just charge the device when it indicates low battery. Plug in the power source after inserting the charger plug, this can prevent potential risk to ensure a safer charger. It takes around 4-5hrs(N13)/5-6hrs(N13 Max) to get 100% charged, when the red lights turn into green, indicating the charging is completed.
When cleaning • Please make sure the E-scooter is off. • Please use soft cloth to clean the E-scooter. • Please don’t use water to wash the E-scooter or place E-scooter in water. When storage • Please place the E-scooter in cool and ventilate places (temperature -20~60℃, relative humidity 0~85%). • Please don’t place subjects on the E-scooter or heavy subjects to squeeze the E-scooter. 14.2 Battery Pack Maintenance When the E-scooter is fully charged, please check the voltage of the battery in APP.
without the guide or help from professional maintenance from the seller or distributors. Please make a video or photo to distributors when the E-scooter run abnormally, as well as providing the serial number. Check the tire pressure before riding; if the tire pressure is insufficient, please inflate it in time; the recommended tire pressure is 250-300kPa, and the maximum tire pressure is 300-350kPa. Attentions before riding ① ② Check①②of the scooter before riding. Firm or not.
Kingsong Intell Co.,LTD Address : BLDG 7, NO 71 XINGHU RD, 8TH INDUSTRY PARK, HONGXING, YUTANG,GUANGMING,SHENZHEN Tel : +86-755-23193477 Fax : +86-755-23193248 E-mail : info@szkingsong.