INSTRUCTION MANUAL CD/SD/USB/RADIO Model:TY-CWU500 CD328BT IMPORTANT: Please read before using and keep for future reference.
IMPORTANT NOTES CAUTION Use of controls or adjustment or performance of procedures other than those specified herein may result in hazardous radiation exposure. DANGER This Compact disc player is classified as a Class 1 LASER PRODUCT. THE CLASS 1 LASER PRODUCT label is located on the rear exterior. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications. Avoid installing the unit in locations described below: 1.
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver.
• Warning: There is a danger of explosion if you attempt to charge standard alkaline batteries in the unit. only use rechargeable NIMH batteries. • Battery shall not be exposed to excessive heat such as sunshine, fire or the like. • Caution marking is located at the rear or bottom of the apparatus. • The marking information is located at the rear or bottom of the apparatus. • Keep new and used batteries away from children.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol indicates that this product incorporates double insulation between hazardous mains voltage and user accessible parts. This product utilizes a Class 1 laser to read Compact Discs.
5
. 6
LOCATION OF CONTROLS NAMES OF CONTROLS 14. BACK/FAST BACKWARD/-10 BUTTON 15. CD DOOR 16. NEXT/FAST FORWARD/+10 BUTTON 17. STOP BUTTON 18. PLAY/PAIR/PAUSE BUTTON 19. STANDBY BUTTON 20. TUNING KNOB 21. ANTENNA 22. LEFT/RIGHT PASSIVE SPEAKERS 23. HANDLE 24. BATTERY DOOR 25. AC SOCKET 1. 2. 3. 4. 5. 6. 7. 8. 9. DISPLAY SPEAKER DECORATION RING LEFT/RIGHT SPEAKERS PHONES JACK SD CARD SLOT USB PORT STANDBY/PAIR INDICATOR AUX IN JACK PASSIVE SPEAKER DECORATION RING 10. VOLUME KNOB 11. FUNCTION BUTTON 12.
REMOTE HANDSET LOADING THE BATTERIES INTO THE REMOTE HANDSET Open the battery compartment cover. Insert two “AAA” batteries (not included) as indicated inside the battery compartment. Close the cover. Key Functions: 1. FUNCTION BUTTON 2. TUN.3. STOP BUTTON 4. SKIP BACKWARD BUTTON 5. FOLD.+/+10/MEMORY+ BUTTON 6. MUTE BUTTON 7. PROG./MEMORY/P-MODE BUTTON 8. VOL- BUTTON 9. VOL+ BUTTON 10. DISCO LIGHT BUTTON 11. EQ/ID3 12. FOLD.-/-10/MEMORY- BUTTON 13. SKIP FORWARD BUTTON 14. PLAY/PAUSE/PAIR BUTTON 15.
POWER SOURCE This unit is designed to be operated on AC/DC. AC OPERATION Plug the tail of supplied AC power cord into AC socket on unit and the plug into household AC outlet. The batteries will be automatically disconnected. This unit is designed in Switched-Mode Power Source with voltage range from 100V to 240V. DC OPERATION Open the BATTERY COMPARTMENT DOOR. Install 8pcs UM-1/D size batteries (not included) into compartment. Please follow correct polarities as indicated.
RADIO OPERATION TUNING RADIO STATIONS 1. 2. 3. 4. Press the FUNC. button on unit or on remote control to select the TUNER FUNCTION, this unit is designed for FM ONLY. Tune to desired station by rotating the TUNING knob on unit or by pressing TUN+/ , TUN-/ key on remote control, the display will show the band frequency. Example: FM 97.10 MHz. If the radio receive Stereo signal, “STEREO” will show on the display.
5. To remove the CD, press STOP button on unit or on remote control to turn off the unit, then press the PUSH TO OPEN button to open the CD compartment lid. Hold the CD by its edges, and take it out carefully. Note: 1. Make sure the disc is stopped before opening the CD DOOR. 2. To ensure good system performance; wait until the unit completely reads the disc before proceeding. 3. If no disc loaded into the tray, or the disc is unreadable, the display will show “NO DISC”. PLAYING A DISC 1.
6. Press the STOP button on unit or on remote control to stop program playback. To clear the program, you may press STOP button on unit or on remote control when the disc stopped and open the CD compartment lid, the program will be erased. REPEAT PLAY You can play one track or all tracks on the disc repeatedly. To Repeat a Single Track 1. Press PROG.
5. Proceed program play/repeat play (repeat 1- repeat folder - repeat all)/random play/intro play operation as the same described in above “CD/MP3 OPERATION”. 6. It supports 32GB (USB) CAUTION: Do not use any USB extension cable for connecting the USB bar which may cause harmful interference SD CARD OPERATION 1. Press the FUNC. button on unit or on remote control to select “CARD” mode. 2. Connect the SD CARD to the SD INPUT. The LCD will show the total number of tracks stored in the SD CARD.
COMPACT DISC MAINTENANCE 1. Always use a compact disc bearing the mark as shown. 2. Notes on handling discs Removing the disc from its storage case and loading it. Do not touch the reflective recorded surface. Do not stick paper or write anything on the surface. Do not bend the disc. HANDLE DISC ONLY AS SHOWN 3. Storage Store the disc in its case. Do not expose discs to direct sunlight or high temperatures, high humidity or dusty places. DO NOT STORE NEAR HEAT 4.
SPECIFICATIONS GENERAL Power Requirement ………………………… AC100V-240V~60/50Hz DC 12V UM-1/D x 8pcs Power consumption …………………………. 48 Watts Standby consumption ………………………… <0.5 Watts Dimensions………………………………………21,0(D) x 49,2(W) x 19,8 (H) cm Operation temperature………………………… + 5°C – + 35° C BLUETOOTH: 5.0 VERSION RECEIVER SECTION Receiving Bands…………………………………FM Frequency Range ……………………………… FM 87.5 – 108 MHz COMPACT DISC SECTION Optical Pickup……………………………….