INSTRUCTION MANUAL MP3/CD Bass Reflex Boombox & PA System with Bluetooth® MODEL NO.: NPB-262 MODEL NO.:CD326 BT IMPORTANT: Please read before using and keep for future reference.
1
2
3
4
5
6
IMPORTANT NOTES INTRODUCTION Thank you for buying this product. Please read through these operating instructions, so you will know how to operate your equipment properly. After you finished reading the instructions manual, put it in a safe place for future reference. CAUTION Use of controls or adjustment or performance of procedures other than those specified herein may result in hazardous radiation exposure. DANGER This Compact disc player is classified as a Class 1 LASER PRODUCT.
Avoid installing the unit in locations described below: • Places exposed to direct sunlight or close to heat radiating appliances such as electric heaters, or other equipment that radiate too much heat. • Places subject to constant vibration. • Unventilated or dusty places. • Humid or moist places. Operate buttons and switches as instructed in the manual. Before turning on the power for the first time, make sure that the power cord is properly installed.
LOCATION OF CONTROLS NAMES OF CONTROLS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 33. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. Display USB port Remote control compartment DIR/MEM/10 + button DIR/MEM/10 – button PROG/P-MODE button 6.3mm MIC input jack 3.5mm AUX IN jack MIC Volume + button MIC Volume – button Speaker guard Left/Right speakers NEXT/FORWARD button PLAY/PAIR button GUITAR Volume + button GUITAR Volume – button AC power cable socket 9 3.5mm headphone jack 6.
REMOTE HANDSET 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. FUNCTION MUTE MEMORY EQUALIZER DIRECTORY/MEMORY/10 UP & DOWN PREVIOUS/REVERSE and TUNING– PLAY/PAUSE P-MODE (Play mode) STOP PAIR NEXT/FORWARD and TUNING+ ID3 (show MP3 info tags) VOLUME UP & DOWN LIGHT PROGRAM STANDBY (POWER) Remote transmitter Battery compartment Note: Please remove the plastic protector from the battery compartment before using for the first time.
battery should face up. Slide the tray back into the compartment until the clasp clicks into place. POWER SOURCE This unit is designed to operate on or AC/DC electrical systems. AC OPERATION Plug one end of the power cord into the AC power input on the unit; plug the other end into a household AC outlet. (Battery operation will be disabled automatically when AC power is used). DC OPERATION Open the battery compartment door [30].
6
BASIC FUNCTIONS TURNING THE UNIT ON/OFF Press the POWER button [28] to turn the unit on or off. Adaptor with ferrite must be used with this equipment to ensure compliance with the Class B FCC limits. SETTING THE FUNCTION MODE There are 5 function modes; press the FUNCTION button [27] to change modes. The 5 modes are: • FM: Listen to FM radio broadcasts. (This is the default mode when you turn the unit on.) • AM: Listen to AM radio broadcasts. • CD: Play compact discs (CD-audio or CD-MP3).
Choose a preset that best matches the style of music that is playing; the presets have been calibrated to enhance your audio enjoyment. ID3 (show tag) System Some MP3 files are encoded with information such as the name of the song, the artist, and the album. Together, this information is called an "ID3 tag". Press the ID3 button [23] to cycle through which information to display when playing an MP3 file, or choose not to show any ID3 information at all.
MANUAL PRESET MEMORY Choose which stations to save in preset memory instead of scanning automatically. 1. Turn the TUNING dial [21] to tune to the station that you want to save as a preset (e.g., 93.10). 2. Press the PROG/P-MODE button [6]. “P01” will flash on the display to indicate that you are saving the station as Preset Memory 01. (To change the preset memory number, press the DIR/MEM/10+ [4] or DIR/MEM/10– [5] buttons.) 3. Press the PROG/P-MODE button [6] to finish saving the station (e.g.
To scan quickly to a point in a track Press and hold the NEXT [13] or PREV [19] buttons to quickly scan forward or in reverse through a track. The track time is shown on the display. To skip tracks quickly (for MP3 discs, only） To skip 10 tracks at a time, press the DIR/MEM/10+ button [4] to skip forward 10 tracks. Press the DIR/MEM/10– button [5] to skip backwards 10 tracks.
1. Connect the USB memory stick to the USB port [2] found on the front of the unit. The display will show the total number of playable tracks on the USB device. Playback will start automatically from Track 1. 2. To pause playback, press the PLAY/PAUSE/PAIR button [14]. The current track time will flash on the display. To resume playback, press the PLAY/PAUSE/PAIR button [14] again. 3. To stop playback, press the STOP button [22].
AUX MODE Play audio from devices connected to the AUX IN jack [8]. Connect a 3.5mm AUX cable to the AUX IN jack [8] found on the front of the Boombox and it will switch to AUX mode automatically. To exit AUX mode, disconnect the cable from the AUX IN jack [8]. 1. Connect your audio device to the 3.5mm AUX IN jack [8] found on the front of the unit with a 3.5mm AUX cable. 2. Set the volume level of the connected audio device to approximately 80%.
SPECIFICATIONS GENERAL Power Requirement ................................................................................AC100-240V -60/50Hz DC 15V UM-1 (D-Size) x 10pcs Power consumption ....................................................................................................... 65 Watts Dimensions ................................................................................ 219(D) x 660(W) x 224 (H) mm Operation temperature ....................................................................
