Item # 1001 xxx xxx Model # 51759 UL Model # 52-PLM USE AND CARE GUIDE HALLMAN 52-INCH CEILING FAN Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday. 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS THANK YOU We appreciate the trust and confidence you have placed in Home Decorators Collection through the purchase of this ceiling fan.
Table of Contents Table of Contents................................................................. 2 Assembly............................................................................... 7 Safety Information................................................................ 2 Operation............................................................................ 15 Warranty................................................................................ 3 Care and Cleaning................................
Warranty The supplier warrants the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a lifetime after the date of purchase by the original purchaser. The supplier also warrants that all other fan parts, excluding any glass or acrylic blades, to be free from defects in workmanship and material at the time of shipment from the factory for a period of two years after the date of purchase by the original purchaser.
Pre-Installation (continued) HARDWARE INCLUDED NOTE: Hardware not shown to actual size.
Pre-Installation (continued) PACKAGE CONTENTS F A K G L B H M C I J E Part Description N 1 2 3 4 ON DIP D Quantity Part A Slide-on mounting bracket (inside canopy) 1 F Light kit pan 1 G Light kit plate 1 B Ball/downrod assembly 1 H Blade bracket 5 C Canopy 1 I Blade 5 D Decorative motor collar cover 1 J Light kit decorative cage 1 E Fan-motor assembly 1 K light kit fitter assembly 1 L Edison bulbs (40-Watt, Maximum) 3 M Light kit bottom cap 1 N Receiver
Installation MOUNTING OPTIONS NOTE: You may need a longer downrod to maintain proper blade clearance when installing on a steep, sloped ceiling. The maximum angle allowable is 30° away from horizontal. WARNING: To reduce the risk of fire, electric shock, or personal injury, mount the fan to an outlet box marked “Acceptable for fan support of 35 lbs. (15.9kg) or less” and use the screws provided with the outlet box.
Assembly - Attaching the Blades 1 2 Attaching the blades to the blade brackets Fastening the blade assemblies to the motor □□ Attach a blade (I) to the blade bracket (H) by inserting the □□ Fasten the blade bracket (H) to the fan-motor assembly (E) by □□ □□ □□ screws (AA) into the holes in the blade and through the blade bracket (H). Tighten each screw securely. Repeat this step for each blade and blade bracket.
Assembly - Standard Ceiling Mount 1 2 Preparation for standard mounting □□ Remove the canopy ring (FF) from the canopy (C) by turning □□ □□ Routing the wires □□ Route the wires exiting at the top of the fan-motor assembly (E) through the canopy ring (FF). □□ Insert the ball/downrod (B) through the canopy (C) and slide the decorative motor collar cover (D) onto the end of the ball/downrod (B). Make sure the slots on the canopy (C) are on top.
Assembly - Hanging the Fan 1 2 Attaching the fan to the electrical box □□ Carefully lift the fan-motor assembly (E) up to the slide-on mounting bracket (A). WARNING: To reduce the risk of fire, electric shock, or other personal injury, mount the fan to an outlet box or supporting system marked “Acceptable for fan support of 35 lbs. (15.9kg) or less” and use the mounting screws provided with the outlet box.
Assembly - Hanging the Fan (continued) 3 Setting the code on the remote control and receiver 1 NOTE: The frequencies on your receiver and hand unit have been preset at the factory. Before installing the receiver, make sure the dip switches on the receiver and hand unit are set to the same frequency. The dip switches on the hand unit are located inside the battery compartment. 3 4 O 2 D ON 1 NOTE: The switch marked ”O/D” controls the dimming function of the lights.
Assembly - Hanging the Fan (continued) 5 6 Wiring the receiver to the household wiring WARNING: To avoid possible electrical shock, turn the electricity off at the main fuse box before wiring. If you feel you do not have enough electrical wiring knowledge or experience, contact a licensed electrician. IMPORTANT: Use the wire connecting nuts (BB) supplied with your fan. Secure the connectors with electrical tape and ensure there are no loose strands or connections.
Assembly - Hanging the Fan (continued) 7 Wrapping the extra wire 8 WARNING: When using the standard ball/downrod mounting, the tab in the ring at the bottom of the mounting bracket must rest in the groove of the hanger ball. Failure to properly seat the tab in the groove could cause damage to the wiring. NOTE: Follow this step ONLY if you did not cut the extra length off from the wires coming from the ceiling fan to the receiver.
Assembly - Attaching the Light 1 Attaching the light kit pan □□ Remove one screw (NN) from the black bracket below fan motor □□ □□ □□ assembly (E), loosen but do not remove the other two screws. Push the light kit pan (F) up to the fan motor assembly (E) so that the two loosened screw heads fit into the keyhole slots. Turn the light kit pan (F) clockwise. Re-install the screw (NN) that was removed in step 1. Make sure all the screws are firmly tightened.
Assembly - Attaching the Light (continued) 3 Attaching the light kit plate □□ Remove one screw (PP) from the light kit pan (F), and loosen, □□ □□ □□ but do not remove the other two screws. Push the light kit plate (G) up to the light kit pan so the two loosened screw heads fit into the keyholes slots. Turn the light kit plate (G) clockwise to secure. Re-install the screw (PP) that was removed in step 1. Make sure all the screws are firmly tightened.
Operating Your Fan and Remote Control A. Warm weather Remote Control - Your fan is equipped with a remote control to operate the speed and lights of your new ceiling fan. YY Speed setting for warm or cool weather depends on factors such as the room size, ceiling height, number of fans and so on. The fan is shipped from the factory with the reversing switch (YY) positioned to circulate air downward.
Care and Cleaning WARNING: Make sure the power is off before cleaning your fan. □□ Because of the fan’s natural movement, some connections may become loose. Check the support connections, brackets, and blade attachments twice a year. Make sure they are secure. It is not necessary to remove the fan from the ceiling. □□ Clean your fan periodically to help maintain its new appearance over the years.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.