USER MANUAL KINEXON Receiver (Anchor) Handheld Application Version 1.2 1 ©KINEXON 2019. This document is confidential and contains information which is proprietary to KINEXON GmbH. No reproduction is permitted without prior express written permission of the author (info@kinexon.com).
KINEXON RECEIVER (ANCHOR) The KINEXON Anchors are reference points for the tracking sensors that are positioned around a desired area. They send and receive signals from the sensors and transmit the information to the Edge server in real-time. SPECIFICATIONS Material Dimensions Weight Power Supply Battery Lifetime Charging Temperature Communication ABS+PC blend 130 x 130 x 45 mm 270 g (incl. antennas, without battery) Battery PoE (48V, 6.5W) Cable/Side contacts (12-24 V, induces charging) 5.
RECEIVER MOUNTING Generally, there are two possibilities concerning the environment in which the KINEXON receiver will be temporarily placed: Indoor or outdoor. The receiver can be powered on and off by pressing the power button. In indoor as well as outdoor environments, the receiver will be temporarily mounted on tripods etc. REGULATORY AND LEGAL INFORMATION The KINEXON Receiver has been designed to be in compliance with both the U.S. FCC Part 15 subpart F regulations, sections 15.519 and 15.
FCC COMPLIANCE This device complies with 47 CFR Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
